Console JAMMAizer! Easily connect home consoles to your JAMMA arcade cabinet.

[SailorLodestar]

Anybody had their buttons stop working and solved the problem?

I’ve been running Project Justice on the Dreamcast using two Brook retro boards. Today the punch and kick buttons stopped working but the joystick and start buttons still function.

I checked all the inputs on a CPS 2 board and used a regular DC controller to make sure it wasn’t the ports. Any advice?

 

[Arthrimus]

Anybody had their buttons stop working and solved the problem?

I’ve been running Project Justice on the Dreamcast using two Brook retro boards. Today the punch and kick buttons stopped working but the joystick and start buttons still function.

I checked all the inputs on a CPS 2 board and used a regular DC controller to make sure it wasn’t the ports. Any advice?

Have you tried redoing your button map on the JAMMAizer? It's possible for the EEPROM storage inside of the microcontroller to become corrupted if there was a power supply brown out or some other power related issue. If the EEPROM was corrupted then the buttonmap you had stored would be lost and you'd need to program it again.

 

[SailorLodestar]

Have you tried redoing your button map on the JAMMAizer? It's possible for the EEPROM storage inside of the microcontroller to become corrupted if there was a power supply brown out or some other power related issue. If the EEPROM was corrupted then the buttonmap you had stored would be lost and you'd need to program it again.

Following your remapping guide on your website fixed it. Thank you.