Search results

As shown, this original JAMMA harness labeled Midway Mortal Kombat 2 (MK2) looks complete as received other than not including the control panel harness. I didn't end up needing it for a restoration project. $80 plus 10 shipping to USA destinations

For sale are components in original boxes/packaging as bought new, opened but unused, that can be used together to connect your home consoles to a JAMMA arcade machine. These were items I bought with intention to put in an arcade cabinet but never ended up connecting them or playing on them. I'm...

Working on a Final Furlong 2 which has two horses and monitors. One game board stopped booting and it has been determined that a faulty MSPM daughtercard that plugs in one of the main boards is causing the issue. If the good MSPM daughtercard is swapped then the other board becomes fully...

These RCA output line converters are inexpensive and work well to connect a CPS1 multi mono audio to a stereo wired cabinet. I soldered a mini plug to the CPS1 multi adapter card JAMMA pin audio out pins. Then I connected one of these output line converters by installing a plug on it so that it...

Looking to buy some (any) KI/KI2 blue buttons. They have a thick ridge on them, maybe they are in some other games also. Attached is a photo. Thanks

Lately I've been designing these Lit Kits, lighted pinball flipper kits, and they are now available at http://www.ArcadeMade.com It's a fun way to add some game to your game! They also can really help you plan your next shot when viewing up the playfield as they keep the flippers in your...

You get two NEO GEO 1 Slot PCB upper portions as shown shipped to an address in the continental USA for $55. These have not been used or tested by myself.

I recently installed an internally powered subwoofer inside a Blast City and will be installing another identical setup in another Blast due to the great results. If you can find an Ativa D-1051A 5.1 stereo system yo might pick one up. You only need the subwoofer and not the speakers (I found...

Was there specific game art made for Capcom Impress cabs? Or is there a generic size that fits Impress cabs and also other Japanese cabinets? If so, does anyone have samples, scans, or repros or originals available? Thanks

I have a secondary CPS3 motherboard that plays with the following issues and looking for suggestions. 1) main issue is the color red seems shifted/ duplicated as shown in the attached photo on the CPS3 color test. You can see it overlaps on the white bar also. I’ve ran the PCB on more than one...

Here is a Sega System 16 Altered Beast PCB with a Jamma Adapter that allows you to change the buttons if desired (this is the JAMMA adapter: https://www.arcaniac.com/products/sega-system-16-24-to-jamma-adapter). -The Altered Beast PCB plays and sounds good and all attract mode looks normal and...

Final Fight arcade game restoration is Finally Finished! It was lots of fun and I put much authentic and historically-accurate effort in this to make it the best I could: from metal working, wood working, electronics/monitor, wiring, artwork design/application, painting etc. Check out the full...

Looking for a yoke for a Nanao MS-2931 monitor. These were found in Sega Blast City cabinets and F355 cabinets among others. Thanks

Just recently I have performed a successful Nanao MS-2931 arcade monitor tube swap from a TV donor for a Sega Blast City arcade cabinet. Here's some information I posted on the donor TV tube etc: Nanao MS-2931 Arcade Monitor Tube Swap

This is a new just opened (just to test video and sound) JAMMA loom for Sega Blasts City cabinets. $88 shipped to USA destinations only.

Here's a game you don't see that often. It is a three button fighting game so there is no need for a kick harness. It also has a switch for running mono sound through the JAMMA edge or stereo sound though a connection on the PCB. I have only ran the mono sound myself. Tested working. $122...

Hi, a friend is receiving the following symptoms after attempting to install his CPS2 multi kit. He says the Darksoft kit is clearly coming on (he gets the green light on the board) and the SD card is reading (he can actually scan through the roms on the SD Cart and get a game to flash into the...

Just wondering if anyone had experience with this model, or if this is the one people are using: https://www.itead.cc/scsi2sd.html Thanks

Who currently takes on desuicide or phoenix repair at this time? This CPS2 board had a leaked battery, that I just removed and cleaned the area thoroughly with white vinegar. It cleaned up well but looks like the following need to be replaced 1) LS245 chips at locations 10L and 10M 2) 10uf...

I've always liked the music arrangement on the 3DO version of Super Turbo. Would it be possible on the CPS2 multi to make a version of ST using the 3DO intro and stage music tracks? Akuma's stage and the intro arrangements are especially top tier.