Search results

Got a 4 slot from a friend that was not working, I patched a trace under the battery and got it to boot. Only issue is I get sound out of only slot 1 and 3 but not slot 2 and 4. I already cleaned the slots and inspected the board for for broken traces and found none aside the one under the battery.

Blast city at Brooklyn Arcade was maxing out at 4.77V , making the naomi 2 in it freeze. Last night I took it apart cleaned and recapped it and the sound amp. Surprisingly after this the 5v jumped up to 5.21, I brought it back down to 5.08 and let it run for hours with no issues.

My friend's arcade, https://x.com/ArcadeBrooklyn?t=XricFftS9LcnTML8mQ5q6g&s=09 Had receives a versus city last Saturday and player 1 monitor was shrinking horizontally. Took the chassis out last night and found tons of bad pads and shitty patch work. Was able to redo all of it and get it back...

Installed unibios and an RCA stereo out for a buddy of mines. The versus harness for his Astro City cabs only has RCA in for audio and not jamma. He was getting no sound while playing his mv1c, so he sent on my way for moddingm

Someone saw my post about the previous cps3 ppu pin repair and sent me theirs. Seems their graphical issues were similar. Some pins were bent, some were floating. I reflowed and straightened the pins.

Friend from Mexico gave me a cps3 that had corrupted graphics. Turned out to be a bunch of pins that were bent and shorting out.

This is in a windy 2 given to me by a friend, the cab was non working I believe maybe a part of that big buy a few years ago. I cleaned it up as best as I could and tried turning it on and got a thin blue line down the middle vertical collapse. I went a head took the chassis out, it had a lot...

A friends MSH V SF board was showing vertical bars in the video, when I took it off the B board the A board had a broken pin. I was able to take the pin from one of my broken parts board and use it to fix the problem.

One of the screws on my windy 2 rusted off so I ended up swapping both locks. I was lucky to still have both tangs. I also installed the PCB door kill switch bypass on one of my buddies blast city.

This one had some bent pins on the I/O custom chip when the owner first bought. The pins were actually touching each other, so he straightened them out. One of these pins coincidentally belonged to player 1 HK. I believe by the time he got it the damage from the pins being shorted together was...

A friend had replaced his sound module and could not socket it so he used wires. Worked for a while but lost sound eventually. He sent it my way tu remove and reinstall with a socket.

I am trying to lengthen the neckboard wires on a MS-2933 I am planning to install on a windy 2. If anyone knows what these connectors are

Spent a couple of hours each night for four nights to get this going for my friends at. https://twitter.com/ArcadeBrooklyn?t=yXJZy_2uDjASIRwSwU-h4g&s=09 Originally I went over the chassis before putting on the tube, good thing I did because I found bad pads on Q511 and one of the neck board...

Had a friends board for hdmi install and he told me he had a checkerboard pattern, when I ran the ram test I got back a bad IC111. I had a parts board somewhere in the house I just did not remember where, last night I finally found the parts board. The parts board was a victim of bad packing...

Replace the cart port on a cps3 for a friend. The pins were pretty lose on his slot, pretty much had to push the cart back to get it to boot.

One of my customers from Texas had sent me his Naomi 2 for an dcdigital hw hdmi install and a this namco pcb a few days later. When I finished his naomi 2 hdmi install he asked if I could maybe try and look at the namco board too so I can ship them both back. Oh man this thing was a nightmare...

Recapped a second yaton ms8-29 for my friend's arcade, it was a bit of a mess around the vertical IC. I cleaned, recapped, and redid the mess in the vertical IC area. Unfortunately now I don't get video, I just get raster lines. I went over all the work and found r570 blown, the video b+...

Decided to finally recap the second yaton Astro city chassis at my friend's arcade Brooklyn games and arcade. Boy I am I glad I did, cold cracked joints, blown traces and bad patch work at the vertical IC. The arcade closes early so I did not get to test or calibrate it, I planned on doing that...

This one gave up the ghost on one of our Astros not too long ago. It went from working to showing a black garbled image in the middle. I reflowed all suspect joints fully recapped it and replaced all transistor in the B+ area except for the 2SC4157. It turns on fine now but shows what you see in...

A year ago @networkingyuppy got two Astro city for our l local arcade here in Brooklyn NY. He turned them on and one survived the other went up in smoke. Not wanting to wait for me to have time to tackle the repair, we chose to get a replacement chassis. The original chassis that went up in...