Search results for query: *

@anomaluigi yes, I have it. Sending a PM.

Were some CPS3 systems sold with and some without directly from Capcom?

Here’s another style that I found discarded on the curb. I’m also restoring four of these due to the ultra strong frame. I removed the large backrest and then recovered with the same material. This style was much easier to do without the intricate sub backrest of the first ones above. By the...

Photo of MC Cthulhu EZ Upgrade PCBs

Here are a couple photos of the install.

Found four of these stools discarded on the curb sometime ago, and thought they’d have some promise to convert into candy cab stools as they have a nice little backrest and are structurally super durable. When measuring, I found if I cut the stool with my cutoff tool just below the front foot...

today's update

An original Aerocity has a bad power supply. The intention is to run JAMMA games but also a Naomi with Capcom I/O. Would the following power supply with adapter cable be deemed sufficient enough to support running the Naomi hardware? Just confirming before going that route. 16Amp Power Supply...

Added MC Cthulhu EZ Upgrade PCBs

Thanks for the response, I’ll see if I might examine the traces closer and reflow solder. I’d like to get a hot air or rework station for these smaller surface mounted chips, or have someone reflow it.

updated for today

As shown, this original JAMMA harness labeled Midway Mortal Kombat 2 (MK2) looks complete as received other than not including the control panel harness. I didn't end up needing it for a restoration project. $80 plus 10 shipping to USA destinations

For sale are components in original boxes/packaging as bought new, opened but unused, that can be used together to connect your home consoles to a JAMMA arcade machine. These were items I bought with intention to put in an arcade cabinet but never ended up connecting them or playing on them. I'm...

Working on a Final Furlong 2 which has two horses and monitors. One game board stopped booting and it has been determined that a faulty MSPM daughtercard that plugs in one of the main boards is causing the issue. If the good MSPM daughtercard is swapped then the other board becomes fully...

I appreciate the craftsmanship in this, cool project.

One can also add an RCA output line converter to the CPS1 multi filter board for about $9 which accomplished all of the sound functionality I was looking for to run the multi in a stereo-only cab or a mono JAMMA cab. Then you get sound over the JAMMA connector as usual and can also get mono CPS1...

Interested depending on timing, thanks

If you have the original tube, you can remove the yoke and use a tube from a 25" TV. I swapped one in my Daytona USA and it looks great. A 25" tube that fits a 25" k7000 is also the same size from my experience (you just need to use the yoke from the original MS8-26 setup).

These RCA output line converters are inexpensive and work well to connect a CPS1 multi mono audio to a stereo wired cabinet. I soldered a mini plug to the CPS1 multi adapter card JAMMA pin audio out pins. Then I connected one of these output line converters by installing a plug on it so that it...