monitor repair

Hello! My name is Victor, born in 1987. I’m a father and live in Gothenburg, Sweden. I’ve been a long-time outside lurker and a self-taught electronics enthusiast who’s been tinkering with a little bit of everything for over 15 years as a hobby. The last few years I’ve been a lot into...

The issue was solved thanks to help I figured out I had some bad cables, which is why I was having intermittent issues. Hello I have an NEC PG-2740 that has these issues. Sometimes it can turn on and be fine for an hour. Sometimes within a minute this starts. It seems to reset itself and...

Howdy. Just picked up an OK Baby for dirt cheap only expecting to do some plastic welding on the body but seems like I have a bigger issue to resolve. REALLY do not want to have to replace the whole monitor. Looking for applicable replacements for the tube on this guy because all else seems...

Hi everybody, my BC monitor stopped working last week. The screen is just black but there were also some loud snaps and pops on power up. I took it to a local repair guy and he said that the tube was bad and that it was non repairable. Anyhow, I need a new monitor and have a few questions as far...

Hello there, I 'd like to maintain my Hantarex Polo/2 25-28 15/25kHz AUTO Monitor (which giving issues - i ll create a separate post for this) by changing at least the components that are aging over time, mostly capacitors, on the main, control, crt socket, switch and e-w boards. Do you have a...

Hi all, first time poster here. Also first arcade machine I've ever worked on, so still learning a lot. TLDR: TM-202g monitor has green tint, transistor swap didn't fix, power resistors on neckboard are stupid hot. I'm in the middle of repairing/modifying a Millipede upright cab, and was...

Got a cab with an MS9 recently and the monitor seemed DOA. Took it to PNL and they got it back online but now it doesn’t maintain geometry and if you push the image right on the remote board it starts to collapse on its self -the displayed image is noticeably crushed/ more narrow to that side...

Hi there. I've recapped one of my New Net City Toshiba PF D29C051 in an effort to improve minor geometry issues, however, I seem to have damaged or broken something. I'm hoping some of your guidance can help me narrow down the culprit. Post recap, the picture was bouncing around like crazy...