sega

  1. jermz1

    Namco Land, Bandai Namco, Namco Amusement Space, Game, Sega, Club Sega, HEY Banners

    Noticed these banners have not been made. I still have some tweaking to do. Attached some references. https://ibb.co/q7c60fk https://ibb.co/kxS1kMy https://ibb.co/m8ScMgy https://ibb.co/2ZfKRZn
  2. westillplay

    "sold" COTTON FANTASTIC NIGHT DREAMS SEGA SYSTEM 16 UNTESTED

    " NOT JAMMA " FOR SALE COTTON SEGA SYSTEM 16 PCB UNTESTED I DON'T HAVE THE SYSTEM 16 ADAPTER AND IM NOT INTERESTED IN KEEPING THE BOARD SELLING AS IS . $350 + SHIPPING PAYPAL PAYMENT DHL W.W. FAST SHIPPING
  3. westillplay

    "FS" SEGA ST-V PCBs . price reduced

    the boards boots into bios and ask for a cartridge but have some issues like missing a cap or so . one buyer confirmed that his games did not work on myboard selling as is $90+ shipping 4 boards available
  4. westillplay

    "FS" lowered price SEGA MEGA PLAY ARCADE BOARD " WORKING W.W. FAST SHIPPING

    FOR SALE SEGA MEGAPLAY 4 SLOTS TESTED IT IT WORKS AND ASKS FOR A CARTRIDGE NO GAMES INCLUDED 550 $ SHIPPED W.W. 450$ Shipped
  5. D

    FS: Arcade Board Clear Out (Chihiro, Sega Parts, CPS2)

    Selling off parts of my collection. Available only to USA/Canada at this time. Prices either include or don't include shopping, see listing for info: Chihiro Games/Parts House of the Dead 3 GD-Rom & Security Pic - 200$ Shipped Crazy Taxi High Roller GD-Rom & Security Pic - 150$ Shipped SOLD...
  6. ConversusWV

    (ALL SOLD!) FS: Sega Model 2 and 3 PCBs/Parts

    Hello everyone. I've decided to sell the following Model 2 and 3 Step 2.0/2.1 parts. These all will be great parts to use if anybody wants to fix their boards or add a new title to their Sega arcade collection. I've already got some of these listed on my eBay store but I'm sure many of you Model...
  7. G

    For Sale: Sega OutRunners PCB SNK NeoGeo MVS Base 2F (MV2F) and 1FZ PRICE DROP

    Hello Folks I have some Jamma stuff for sale. Sega Outrunners PCB, Perfect working condition ---> (SOLD) MVS-2F, Perfect working condition (battery Removed) ---> 100€ ---> 80€ PRICE DROP MVS-1FZ, perfect working condition ---> (SOLD) All prices plus send cost from Spain I have very good...
  8. G

    Found: Sega Virtua Fighter 2

    Looking for a full working set of game boards/IO/filter & audio ideally. In a giant cage like my model 1 would be great, not sure how common those are. Had a blast getting the model 1 going and jammified so far and want to do the same for VF2. (I didn’t harm/reuse the wiring harness for that...
  9. westillplay

    "FS" SEGA MEGA PLAY

    Hi there today I'm selling a SEGA MEGA PLAY PCB tested it boots to main menue and asks for a cartridge selling it for 700 $ shipped by Fedex W.W. a photo in Action can be provided .
  10. R

    DSB Clone (Digital Sound Board SEGA)

    This is a replacement board for the SEGA Digital Sound Boards 1 and 2 used on several SEGA arcade games. More infos & downloads here: https://github.com/Rolel/DSBClone Historical background: the original boards The SEGA Digital Sound Boards 1 and 2 are dedicated to playing music (the BGMs) on...
  11. G

    Sega Model 1 help

    Hi folks, I’m looking to buy a virtua fighter Sega model 1. (I know it’s supposed to be a pain) It’s the full cage so it would have the IO board and whatnot. Any advice / links on powering it and getting video out? Ive got a few jamma boards and a supergun but I know this is going to be all...
  12. SailorLodestar

    Removing Monitor Sega Aero Table

    Does anyone know any resources or have any tips on removing the monitor from a Sega Aero Table? I've finally tracked down a replacement for my burnt-out monitor but I've never removed the old one before so I'm not sure where to start. How do I even reach in there to discharge it and unplug...
  13. Carlosbluray

    Sega Ferrari Challenge f355 deluxe VMU Port 839-1132

    Hello friends, I have an arcade f355, and I want to add to it, connect the dreamcast VMU and save my games made in the arcade, I know that this function is performed with part # 839-1132, what I would like you to guide me is which part I should buy to place on the panel and cable should buy...
  14. Mackie

    Univeral Racing Game Cabinet

    Introduction This thread is to detail my experience using some hardware and software made by a French arcade community named "Gamoover" which is available on their forum and that would allow Sega arcade cabinets owners to upgrade them in a non-disruptive manner so that they become somehow...
  15. ConversusWV

    Greetings from the 'burg, South Carolina

    Hello everybody! My real name's Paul but I primarily go by my absurd signature on the 'net, Conversus W. (Wears) Vans. It's a little play I did between the Converse/Vans shoe rivarly over 6 years ago, as I was obsessed with the former of the twos brands. :P Well it's great to meet everyone here...
  16. J

    First serious project i´ve gotten into... Sega New Astro City here i come!

    Hello Arcade friends! My name is Juan from Bogota, Colombia (South America). I recently acquired a Sega New Astro city which is coming in the next couple of days to my place (imported from Ecuador) and i will like your help of how should i tackle this restoration, below are pics of what im...
  17. kikaso

    [SOLD] Atomiswave Motherboard & Crime Fighters

    Decided to keep the Atomiswave MoBo. Thanks, all! Added my spare Atomiswave to the sale/trade. This was purchased as NOS and I have every reason to believe that it was when I purchased it. The JAMMA edge is pristine and the fan is spotless (still loud) as seen in the photos. I've used it maybe...
  18. T

    Naomi 2 problem

    Hey everyone, by the end of last year, I was able to purchase a Sega Naomi 2 with a Raspberry Pi (PiForce Tools 1.5 installed) and a NetDimm (firmware 3.17) Since the whole real arcade hardware was new to me, I had to buy several additional items afterwards (which I didn't knew back then I...
  19. karoshi

    Toshiba PF D29C051 - Recap resulted in failure

    Hi there. I've recapped one of my New Net City Toshiba PF D29C051 in an effort to improve minor geometry issues, however, I seem to have damaged or broken something. I'm hoping some of your guidance can help me narrow down the culprit. Post recap, the picture was bouncing around like crazy...
  20. Softdrink

    Astro / New Astro City LED "Service" Light Mod + 3D Printed Mount Brackets

    Overview When working on my New Astro City, I noticed that the interior could get quite dark; doing maintenance tasks or connecting new game boards was often inconvenienced by the poor visibility. I decided to mount a 24" LED light fixture inside the cabinet, to provide some much-needed extra...
Top