Trying today to have the Fast IO board connected to the type x2 with the Fast IO pci card.
I adapt this to jamma
But seems that i have some problems into the cabling since i have to disconnect pin 1-2-3-4 from the 60 pin harness, were +12v and +5v are, otherwise simply the psu of the jamma won't start at all.
Then i disconnect them and all now starts…
but then i got I/O Error using the multiboot.
Now just to understand….
This card in Fast IO, should works with this 1.4 multiboot, or it's limited to the usb?
Because it it have to works, then i have to check why i have this I/O Error….