What's new
By:

A Freeware Taito TypeX2 Multigame.

Niko said:
Yea it looks like there is something going on with that video card. Try to clean the edge and reseat it, also make sure the power connector is connected to the card. If that doesnt work you'll need to get a replacement video card. Luckily they are pretty cheap. Still a bummer though.
Click to expand...
cleaned the edge and same thing. I picked up a new one for $14 shipped. should be here on Friday. I'll follow your firmware flashing Tutorial on RetroMods :)
 
Hi everyone,

So I install multi
I test some games (not all)
Here games I test and my problem :

Arcana Heart 3, Deamon Bride (Black screen)
KOF XIII (coin error)
Super SF IV (run)

I have also another problem, I have the same Sega V2 like nismopunch
I have a Blast on jamma+ (5 buttons) how I can connect the 6th button on it?

Thank you
 
When reporting issues please state your hardware and whether you are using VGA (480P) or DVI (720P) output. You should also state which version of the multi you are testing 1.0. 1.1 Beta etc,

This is my setup:

TAITO TypeX2 - 210A, 1GB RAM, GF7900GS, DVI 720P Output, 120 GB SSD, LCD Mode, Eizo Flexscan, Capcom I/O V2.
 
Thank you for your reolied :)

My HW : Taito Type X2 - 210A, 512MB RAM, GF7900GS, Only DVI, HDD 250GB (RC2 Release 60Go or larger), Blast City CRT, Sega i/o V2
 
NathanDrake said:
Thank you for your reolied :)

My HW : Taito Type X2 - 210A, 512MB RAM, GF7900GS, Only DVI, HDD 250GB (RC2 Release 60Go or larger), Blast City CRT, Sega i/o V2
Click to expand...
You state only DVI and then you state Blast City CRT ? ?(

And you should move at once to 1.0 or 1.1 beta a lot of bugs were fixed in 1.0.
 
I have 2 dvi connectors only on graphic card so I use an adaptator DVI/VGA

Ok I will update with V1.0 Official Release

Thanks a lot rtw
 
NathanDrake said:
I have 2 dvi connectors only on graphic card so I use an adaptator DVI/VGA

Ok I will update with V1.0 Official Release

Thanks a lot rtw
Click to expand...
Thanks for the feedback.

All of us with: GF7900GS have 2 x DVI but the CRT users have to use DVI->VGA adapter.

Unless they are running on Viewlix where they use 720p via VGA as well.

This is why it is important to state the resolution you are running at. 480p or 720p.

Battle Fantasia will only work when the DIPs are at 480p.

Good luck with 1.0 testing!
 
Update Done!

Daemon Bride, Arcana Heart 3 still not run (Black Screen) :(

KOF XIII still with "Coin Error"

Some games run :
Battle Fantasia
Blazblue Calamity Trigger
Blazblue ContinuumShift
SSF4
Samurai Sen
Trouble Witches

Others not tested

One thing I see when I lanch TTX2 I see on screen only 256MB (on the top left)
 
NathanDrake said:
One thing I see when I lanch TTX2 I see on screen only 256MB (on the top left)
Click to expand...
thats your GPU's memory not system. which is fine

NathanDrake said:
I have a Blast on jamma+ (5 buttons) how I can connect the 6th button on it?
Click to expand...
there is a jumper on your IO board you will need to switch and then you will need to connect your extra buttons to a header on the IO board.

Here is a bit of a write up for the extra buttons http://wiki.arcadeotaku.com/w/JVS#Kick.2FExtra_buttons

i have a similar setup and i run my positive terminals directly to the IO board and then use the ground from my normal buttons. you can also wire it to the BD board of the blast city.

NathanDrake said:
KOF XIII still with "Coin Error"
Click to expand...
is your coin meter connected and working?
 
Thanks for the link I will take a look later.

My coin mecanism works but I think coin meter is blocked (it's the block with number of credit insert right?)
 
As far as the black screen goes, What about Arcana Heart 2.1 or 2.6? Same thing? Are you getting any audio or just nothing?
 
Hi Niko,

I don't have Arcana Heart 2.1 or 2.6 in game list but Arcana Heart 2 and when I launch it, it came back to main menu of multi
 
Ahh ok, did you get Arcana Heart 3 and Daemon Bride from me, or did you find it somewhere else?

Make sure you're using the ones from me, because they have been specially configured to work on the multi.
 
I confirm my coin meter is blocked because it isn't wired :D

image16.jpg


Apparently I don't have cable to connect it.
KOF can't be launched without that?

Thanks for your help Corey
 
Test with another HDD
Same result (80% of games working)

Arcana Heart 3 (not work)
Daemon Bride (not work)
Deathsmile (launch but crash after 10 seconds)

Some Kof with coin error

Other games works (except Arcana Heart 2.1 and 2.6)
 
NathanDrake said:
Arcana Heart 3 (not work)Daemon Bride (not work)
Deathsmile (launch but crash after 10 seconds)

Some Kof with coin error

Other games works (except Arcana Heart 2.1 and 2.6)
Click to expand...
You only have 512MB RAM, That might be the reason for the error for AH3,DB and DS
 
You must log in or register to reply here.
Back
Top