What's new

Aero City PSU capacitor maps (400-5081, -5149 & -5198)

nem

Immortal
Joined
May 29, 2016
Messages
7,660
Reaction score
8,343
Location
Finland
Recapped a few of these the other day. Quite a few caps had started leaking. One actually broke off when I pulled on it leaving a leg behind. So if you have one these in original state, I suggest putting some new caps on it.

Anyway,


400-5081, 400-5149 & 400-5198 (same PSUs basically, components just differently laid out and a different set of connectors)

Input: 90-138VAC
Output: +5V 7A, +12V 1.5A, -5V 0.1A

aero_city_psus.jpg

(400-5081 on top, 400-5149 / 400-5198 at bottom)


Code:
Capacitor     Diameter  Qty  Location

0.47uF 50V    5mm       1    C11
3.3uF 50V     5mm       1    C25
47uF 25V      7mm       1    C24
330uF 200V    25mm      1    C5
470uF 16V     10mm      1    C22
1000uF 35V    16mm      2    C20, C21
4700uF 10V    16mm      4    C12, C13, C14, C15
 
Last edited:
Recapped a few of these the other day. Quite a few caps had started leaking. One actually broke off when I pulled on it leaving a leg behind. So if you have one these in original state, I suggest putting some new caps on it.

Anyway,


400-5081 & 400-5149 (same PSUs basically, components just differently laid out and a different set of connectors)

Input: 90-138VAC
Output: +5V 7A, +12V 1.5A, -5V 0.1A

aero_city_psus.jpg

(400-5081 on top, 400-5149 at bottom)
Code:
Capacitor     Diameter  Qty  Location

0.47uF 50V    5mm       1    C11
3.3uF 50V     5mm       1    C25
47uF 25V      7mm       1    C24
330uF 200V    25mm      1    C5
470uF 16V     10mm      1    C22
1000uF 35V    16mm      2    C20, C21
4700uF 10V    16mm      4    C12, C13, C14, C15
Going to order up today, I use one of these in my canary.
 
Thanks for the list Nem.

I tried started to use digipen as a first timer and was wondering what style of capacitors I should order for this application?

And if there are any features like operating temperature I should look out for and what ones to avoid.

Thanks for the help.
 
Follow up- I received the caps and did the recap today. Like @nem stated, these OG caps were leaking and some were bulging. Took about 30 mins to change the caps and it’s working great now. If you have one on original caps, might want to open it up and check them.
 
I’ve got a 400-5198-01 PSU (which I presume is just a later revision of the 400-5198 ). Do you happen to know if the capacitor list is the same? If not, has anybody mapped this one out?
 
Last edited:
Bumping an old thread...I have a 400-5198 for my Astro City but half of the caps have different µF/volts stated above and really anywhere else.

This is what is in my current PS:

C5 - 330µF 200v
C11 - .47µF 50v
C12 - 3300µF 25v
C13 - 4700uf 16v
C14 - 4700µF 16v
C15 - 3300µF 35v
C20 - 2200µF 50v
C21 - 2200µF 35v
C22 - 680µF 25v
C24 - 47µF 50v
C25 - 4.7µF 5v

On the back of the board it says SJ25-0111-01. The layout is exactly the same though.

Is this just a different revision?
 
Last edited:
Thread is for Aero City PSUs, not Astro.

There's a general thread for capacitors lists below:


You could add yours to it.
 
Last edited:
Thread is for Aero City PSUs, not Astro.

There's a general thread for capacitors lists below:


You could add yours to it.
I used your guide recently and recapped all 7 of my Aero PSU's. Thanks again!
 
  • Like
Reactions: nem
Back
Top