Coin Reject Credit Mech for Sega Naomi / Net City Cabs

[NFGx]

I've just whipped up a coin input mech assembly for the Sega Naomi and Net City series of cabinets.

As usual, the switch comes from a worn out Seimitsu LS-40 mech. You can probably use any old switch in there.

Enjoy!

Latest version will be here: https://nfgworld.com/3d-printing-credit-buttons-for-arcade-cabs/

 

[twon]

Macgyvered your version and made it usable keeping the coin mech in place and splicing the wires into a connector. Now you can credit up from the reject button or coin. Thanks @NFGx

 

[twon]

For reference I used the other coin reject 3d prints you did for Sega and snk cabs, because they were taller and easier to fit.

 

[NFGx]

For reference I used the other coin reject 3d prints you did for Sega and snk cabs, because they were taller and easier to fit.

Good work!

If you get a chance, can you show me a photo of the MacGyver'd monstrosity you've created? I might try and make up a proper design for it.

 

[twon]

 

[twon]

The horseshoe cut out at the bottom isn’t required just make it all square and put 1 hole in it for the screw. You can get rid of all the washers that way

 

[rufus]

Made this one, I can share the STL if you want

 

[twon]

Well damn that’s a lot nicer then mine

 

[twon]

Please share

 

[NFGx]

Made this one, I can share the STL if you want

Oh sweet, I don't have to do anything now. ^__^

 

[twon]

@rufus where you at

 

[rufus]

i just use metal screw to old the switch