CPS2 Suicide Free Modchip

[oguzog]

One more detail.

this is the list

this is the files. One i draw doesn't exist in list. Maybe this file is the true one?

I will try programming this.

 

[oguzog]

Same...

I'll try reprogramming roms to see if everthing allright with board. Then i will try to get infinikeys.

 

[KaPH33n]

Same...

I'll try reprogramming roms to see if everthing allright with board. Then i will try to get infinikeys.

from memory the different iterations of the same game all use the same keys. if you take a crc32 of the different hex files you can determine if the contents are the same.

I wouldn't reprogram the original roms because then you mess up the stickers. You could try just reading the program roms in and seeing if they crc32 the same as MAME roms.

If the suicide tester rom loads fine with the mod chip installed then you know for a fact the keys are not being programmed, so the encrypted roms are not the issue. Do you have an arduino you could try doing the resurrection with? Or you could try a different programmer, I have successfully used a cheap one many times. I used the TL866II Plus, but there may be cheaper alternatives. The infinikeys were difficult to source last time I checked?

 

[oguzog]

Arduino even didn't worked. I've read that REv 4 boards are very problematic. ON Pin 11 (clock) i should put 75-100ohm resistor. Tried everything but no luck.

 

[oguzog]

Burn avalaunch roms and it is working well now. Labels easily come off and still sticky so i put them back.