FS Cps2/Taito f3/MVS/IGS/AES A large quantity of genuine and original products

[Old baby]

IGS PGM KOV 2 ，v107
This cartridge variant is incredibly scarce
$100

 

[Old baby]

FLASH 3 IN 1 The shell has cracks
$50 $30

 

[Old baby]

PHOTO Y2K 2 $85 $50

 

[hombreimaginario]

ORIENTAL LEGENDS EX SUPER
This is the V205 revision, with all 11 characters selectable. A genuine standard build only offers 4 playable characters. Based on the PCB layout, this appears to be a hacked modified cart, though I don’t know the exact modifications. The label sticker is a printed reproduction.

$50

May I ask what equipment you're using to connect your PGM to that screen? What supergun, cables, etc.?

 

[hombreimaginario]

I’ve got a GBSC and an open-source Supergun built following forum plans; the display is a modified iPad 4 screen. The reason the picture quality looks great is that the repurposed iPad 4 panel delivers excellent visual output.

You can find relevant details in this thread; the attached pictures show the display output when connected directly to the GBS8200.
https://www.reddit.com/r/cade/s/wWxwJIwfdn

I assume it's the PGM's fault (or the video signal it outputs) that the image is shifted to the left, then, and that won't happen when connecting a Neo Geo or other hardware.

I wasn't expecting the iPad. That's interesting. Thank you.

 

[hombreimaginario]

IGS and SNK have native different resolutions. I’m just testing the cartridges and couldn’t be bothered adjusting settings. A common flaw with the GBSC unit is a vertical line showing up on the right side after picture stretching, so I’ve decided not to tweak it further.

No no, don't get me wrong. Another user mentioned that unless you're using an arcade monitor you can properly caliber, or an OSCC you take a little while configuring, the PGM image would probably be shifted to the left. It caught my attention to se it here, that's all

 

[Old baby]

Metal Slug X metalslugx
$100 sold

 

[Old baby]

Kizuna Encounter
Only the sticker label has been replaced; the PCB board remains uncleaned.
$130

 

[Old baby]

Over Top
Only the sticker label has been replaced; the PCB board remains uncleaned.
$180 $150

 

[Old baby]

Kabuki Klash
$60

 

[Old baby]

King of Fighters '94
Kof94. $80

 

[Old baby]

King of Fighters '96
An EP1 chip has been added to the original board, unlocking hidden playable characters.
Kof96. $40

 

[Old baby]

Samurai Shodown III
Fighters swords
Korean version Samurai Shodown 3, PCB uncleaned
$100

 

[Old baby]

World Heroes
$70

 

[Old baby]

Kizuna Encounter
$140

 

[Old baby]

Last Blade
$60

 

[Old baby]

Dungeons & Dragons: Shadow over Mystara
There are two original B boards, fitted with self-printed colorful stickers. Each is priced at $400

 

[Old baby]

Six brand new old-stock arcade power supplies. I could not find any information about them; they are presumably manufactured in Japan or South Korea. Only one other seller carries this item online.
I replaced the original 110V power supply of my combo AV joystick with one of these as a direct, damage-free swap.
Input: 220V-240V
Output: +5V 5A, +12V 1A, -5V 1A, -12V 0.5A
The casing and screw holes match the original unit perfectly. The +5V voltage is adjustable.
Price: $99 each

 

[Old baby]

Ninja Master's
The P1 chip has been replaced and repaired
$90 $80 sold

 

[Old baby]

Vampire Savior: The Lord of Vampire (Japan 970519), complete A + B board set.
I have replaced a brand-new original stock battery on the board.
You get a free openkey as a gift (one choice only).
sold
.