DARKSOFT CPS3 Repro Carts!!

[Mitsurugi-w]

The cost of a bios-only service is $55. The cost of the SH-2 service was $150. These are brand new carts with standard SH-2 processors. It will be more than $100 since the cost per cart to have made is just under that mark. Expect $150 for a brand new cart pcb with standard SH-2 to be the final cost.

I realize original carts can be found cheaper. Even live carts are cheaper. But the supply is dwindling lately and combined with the repro simms that are coming also, there will be a ton of pcbs that had been stripped of simms put back into service very soon.

 

[RealMFnG]

Consequently, the cost of admission to play 3s just went down significantly. Thanks Wals-Dawg!

 

[Derick2k]

Expect $150 for a brand new cart pcb with standard SH-2 to be the final cost.

That is an awesome price for these. I will take 2 with a full complement of simms please.

 

[Darksoft]

Ouch, don't say that you killed your cart on Arcade Otaku or other forums or you'll be coursed forever

Well, take into account that this cart comes with a SH2 processor, not the custom one and the SH2 is about $150 itself and you still need an original cart....

As soon as I have all the costs implied clear I will announce the price. Stay tuned

 

[Lemony Vengeance]

Ouch, don't say that you killed your cart on Arcade Otaku or other forums or you'll be coursed forever

Well, take into account that this cart comes with a SH2 processor, not the custom one and the SH2 is about $150 itself and you still need an original cart....

As soon as I have all the costs implied clear I will announce the price. Stay tuned

Question, are the standard SH2 procs on these the same as the ones on a saturn motherboard?

 

[Darksoft]

They should be the same or similar. It will depend on the availability on china. There hare A LOT of SH2 versions, so it's hard to say, but for sure will work 100% like the ones from Saturn.

 

[Lemony Vengeance]

reason I ask is that I have a saturn that I can sac for two of these things.

 

[Darksoft]

That would certainly work. Be my guest

 

[Stat Rey]

Put me down for a cart and simms for 3s

 

[natehe]

I'll wait!!

 

[twistedsymphony]

I got my CPS3 set in over the weekend thanks to Derick2k. I'm nearly half way complete the cart case. I've got to make some adjustments to the front and then I can start working on the back.

 

[Darksoft]

Wow. That incredible or what? More pics please.

 

[twistedsymphony]

I only have the one pic right now, I let the print run over night and only had a few minutes to test fit the PCB and snap a pic before running out the door for work. I'll have more to show later this week

The case design is different from the original but I'm trying to make the mating surface as close to the original as possible so that you can use the 3D printed front with an original back or a 3D printed back with an original front.

 

[Darksoft]

OK Guys. CPS3 Cartridges are ready to sell! I will produce the SIMMS as soon as these are sold.

Price $150 including worldwide shipping.

@natehe, @Lemony Vengeance, @Derick2k, @Starromeo, @Dakken, @kingau, @XeD, @Stat Rey and anyone else interested PM for more info.

 

[Vladi]

ill take one pm sent .

 

[Dakken]

PM sent Darksoft can't wait to get my hands on one and then some simms

 

[RealMFnG]

PM Sent!

 

[Lemony Vengeance]

OK Guys. CPS3 Cartridges are ready to sell! I will produce the SIMMS as soon as these are sold.Price $150 including worldwide shipping.@natehe, @Lemony Vengeance, @Derick2k, @Starromeo, @Dakken, @kingau, @XeD, @Stat Rey and anyone else interested PM for more info.

lemme scrounge up some cash

 

[Derick2k]

Thanks DS, you da man!

 

[Derick2k]

I got my CPS3 set in over the weekend thanks to Derick2k. I'm nearly half way complete the cart case. I've got to make some adjustments to the front and then I can start working on the back.

Thats looks pretty good already T!