Since some of us used a 90 degree adapter for the security cart in these TRFIghtstick CPS3 cases, the opening can be an eyesore, so I made a simple cover.
This "should" cover both the V1 and V2. I have V2 which has the screw mounting points. V1 does not and don't know if the security cart opening was changed in any way for V2. Please test if you can.
https://www.printables.com/model/1808275-cps3-trfightstick-security-cart-cover
V1 should be printed in TPU as you'll need the flexibility for the typical port cover to get it in.
V2 is held down with M3 screws and can be printed in whatever filament you want.
This "should" cover both the V1 and V2. I have V2 which has the screw mounting points. V1 does not and don't know if the security cart opening was changed in any way for V2. Please test if you can.
https://www.printables.com/model/1808275-cps3-trfightstick-security-cart-cover
V1 should be printed in TPU as you'll need the flexibility for the typical port cover to get it in.
V2 is held down with M3 screws and can be printed in whatever filament you want.
