All PCB fabricators require that you buy PCB's in multiples of 3 (I think). Seeing as most will only need one PCB, I believe we can be more efficient if we organize a group buy. I am thinking a single PCB shall cost between $10-$20 but closer to the low end. Anyone (in the US only) want to join a group buy for @'Frank_fjs''s Minigun PCB, please express your interest here. I did a similar thing for undamned's Infikey and that went off without a hitch.
STANDARD
1 - acblunden2 PAID
1 - @'ekorz' PAID
2 - @'West' [b][color=#00FF00]PAID[/color][/b]
1 - @'werejag' [color=#00FF00][b]PAID[/b][/color]
1 - @'F.Jaeger' [color=#00FF00][b]PAID[/b][/color]
2 - @'DarthMig' [color=#00FF00][b]PAID[/b][/color]
1 - @'Ruprit' [color=#00FF00][b]PAID[/b][/color]
ADVANCED
2 - @DarthMig PAID
1 - @XeD
1 - @Ruprit PAID
2 - @bagheera369
Some guidelines in the spoiler:
STANDARD
1 - acblunden2 PAID
1 - @'ekorz' PAID
2 - @'West' [b][color=#00FF00]PAID[/color][/b]
1 - @'werejag' [color=#00FF00][b]PAID[/b][/color]
1 - @'F.Jaeger' [color=#00FF00][b]PAID[/b][/color]
2 - @'DarthMig' [color=#00FF00][b]PAID[/b][/color]
1 - @'Ruprit' [color=#00FF00][b]PAID[/b][/color]
ADVANCED
2 - @DarthMig PAID
1 - @XeD
1 - @Ruprit PAID
2 - @bagheera369
Some guidelines in the spoiler:
- This is for the bare PCB of which ever version suits your needs: Compact/Basic/Advanced
- You'll need to source the separate components yourself
- I am sure Frank_fjs will post a components list later that you can buy from Mouser/Digikey
- For those interested, the cost is:
- Total costs of the specific PCB version shipped from fabricator divided by the total PCB ordered for the specific PCB version, multiplied by the quantity you want, plus shipping and handling to you
- Note: Some may want more than 3, but not quite 6 or 9. If so, this group buy is for you too. If you want 3, 9, 12, 15. Well, you can buy them youself
- I'll be using USPS 1st class mail in a padded envelope
- $1.00 for a padded envelope
- $4.00-$4.50 for USPS 1st class shipping
- 8 or less PCB's, anymore and I believe shipping costs shall go up
- If there is not at least 3 people for a specific version of the PCB, there shall be no group buy for that version. You will have to buy the PCB's yourself
- Since we must order in multiples of 3, if there are any extras, the cost will be absorbed everyone in the group buy for that specific PCB version
- Unless a member wishes to buy up the extras
- You can buy more than one version, same above applies
- Payment by Paypal (Friends & Family)
- Before order is made with fabricator, payment must be received in full, or you are out of the group buy
- Order shall be made 1 week after Frank makes the PCB files available, when ever that shall be (save your money penny pinchers)
- Per unit cost and total costs from fabricator shall be posted 1 day after Frank makes the PCB files available
- Will take feedback on which fabricator everyone wishes to use
- Otherwise well go with the old tried and true purple PCB's from Osh Park
- No one shall hold anyone accountable should the PCB's not work or be damaged in shipping
- Enter at your own risk and of course have to put in the sweat yourself to put it together
- PCB version(s) desired
- Quantity(s) of each PCB version desired
Last edited: