Home Arcade System

Are there multicarts for the Atari Gauntlet, CPS, CPS2, Midway Killer Instinct, Midway T Unit, Midway Vegas, Midway Wolf Unit, MVS, Namco Super Pacman, Namco System 246, Nintendo Vs. System, and Sega Triforce boards?
As was mentioned earlier Triforce games require an inordinate amount of extra hardware. You're going to need a triforce ($500), a steering wheel and pedal set for Mario Kart, and a DIFFERENT steering wheel and pedal set for F-Zero (and you won't find the steering wheel), as well as several I/O PCB's, a dedicated second PSU for JVS, and a third one for FFB. Yes, you can netboot Triforce games, so you won't need to buy the discs and dongles, but you need so much extra hardware it's irrelevant. Also a card reader. All 4 of those games are EASILY playable on a modded wii. The actual triforce images, not ports. Same games.

I listed all the games that have NO multi in an above post. So no to Vegas, Wolf, KI, T Unit, CPS1 (for the next couple years at least), Gauntlet, and any PacMan games.


There's an MVS multi. It's $4xx.00. You'd need also a single slot MVS motherboard.

Sys2x6 has a multi dongle but you still need to burn discs/hard drives. You'll also need a *Namco* JVS I/O and a JVS PSU.

CPS2 there's a multi. You need a kick harness.

VS System IIRC there's something in the works but not out yet. You need a Nintendo VS System to JAMMA adapter, the motherboard, and a cart for each game.
 
Last edited:
You can run Mario Kart GP & F-Zero AX off of a modded Wii very easily with a GameCube controller. (The TriForce arcade hardware is based off of the GameCube.)
Same thing with Wiiu with HD res...F ZERO AX/GX is so nice in widescreen in 1080p. You can use gamecube controller adpter is the best on console.
 
@RdCrestdBreegull you are asking a ton of questions that something like Google (TM) and Wikipedia (TM) can help you on. For example, if you Google "what is a supergun" this is the first hit, which will provide you a ton of answers.

https://en.wikipedia.org/wiki/SuperGun

Also, you can read this thread, a few pages (maybe like 5-8) back I list a ton of boards I've successfully tested with the HAS (spoiler, ALL work great), so read up on that.

You can also look at this site which will show you many popular games and what "systems" they run on. Note that the information isn't 100% correct at times (more like 95%) and also it doesn't go into detail about multi-systems that the genius' on here have developed.

http://www.system16.com

Finally, the members here are awesome and many will help answer your questions, but you should start a new thread with questions instead of clogging up the HAS thread.
 
Hi RGB

My Supergun seems to have some issue

I cannot adjust the the voltage as the Voltmeter seems spoilt and the led light at S (Top right hand) dont seems to light up

 
This has been reported before (Home Arcade System - new supergun sets). I ordered replacement voltmeters and everyone who experiences problems with theirs, will get a new one.

and the led light at S (Top right hand) dont seems to light up
It's not supposed to light up unless you activated the asynchronous autofire mode. Please read the instruction manual for the HAS.
 
Last edited:
I’m wondering if it’s possible to have the HAS, along with some kind of SD card reader to play ROMs from, so that I can play the arcade games I want to play in a legit/quality way, while also keeping my setup looking nice and compact.
I don't think you want a supergun. You would be better served with a MAME setup running on a PC or raspberry Pi.
A Supergun is mainly for playing actual real arcade boards. Some of these actual real arcade boards can have multiple games on them that run on similar hardware. Thus, you can have a CPSII Multi game installed onto your actual real CPSII arcade board and play every game that the CPSII system has on it. You could then have multiple kits like the CPSII for other actual real arcade systems like the Taito F3 or Neo Geo. And each of these would take up room. (and that's a good thing...) :D

If you just want to play all of the games in your list from one device, then a MAME computer setup is most likely your best option. (and that may or may not be a good thing...) =O
 
I got it all up and running last night. I couldn't be happier!

Cj88yugh_WV1CJ-MS54i3dRQ9eiI20xmW3pbpn-0QLnWUT3tIopG3wAlRQCSy0onFLerxPxzTCvAl8sj7NP5ZwhwA-ZJ5JsSimhprR6S9pibDLfy92LaYEjAswhJUC3TEdPIVuX8G52Sljz6mPXODCbWZ7L4Y26TYBIplnsfl7CVnwLCq8AeQ8LYVx1K5oF11E8tRqJAC34OcymX1IfOzpIqgYnRKK5_V19Fhaq4mg1YidZGdPJKKdo9zMAkH1JW766UjXb_HGyrMIJ_SPnP-07fx7REadZRWbGp3FCP1uLhFU6Ty5cjf5g6m-itDKUI95YLz0-Fp9bNazgJfe5TrzT8EoPK5BMajyKxdzmNqRDYSso07a1QIfOgxij5AyKZxa7N87sEiSjXSCTvdbK_DV0oPF79-BYdowehtqGygCR_kDOCjXXg1PTy9DiHkhXFCFW3Ch9LfiJYlSnzXEwqR18MZ972Hijp90XpaWuYiwXROCY4dFGhzeO3H7YhqOGoifn4q1bAcgjSC-ZKeAqwRMfk2tKj0XvYwl9NRgBd-b2psnaMLjidGsFnRfPL-rHPMqdmQFajc-nG7ZhtVfnA6nm22JxHbOHjH1Vi0QOPGRDW8IJTlbeJIvgRZjyvaInfeZO1-AUgUYCTdQBXlLzzdgME=w472-h629-no

RyMMKFzRzfSaE8h2dRQ0IqdhNvJcJF7HApXMPV_Cq1I94fcsJBMTfFAsuksFkmGvdXJZKAamePnviVmeqOEq2vhmNGuh5Z7JR3sa9YkgRWwUL59DNOxCQYk4sU3AcqvEFcgpVS5tgM18EcsBJufYuOURQJnHRQKTpUlNxuopNMbIXq9M-eA5Po12xFmMfH_ZIqYzcZAJIMlBE1p18rCtBCC-GYEGmyRKqnQD8ZxDa3JW8lr-f9RL6DBTzQtQx7iW0ItoAuTrhbZPpcWuFrrpJsxUBicP51Gttv02_Dn3Eeh-k_RzgjkQ2503R6VGpgxxvb0w7qKL3A9fhuFF5PNPfvq9ypPUuccWyPMhgskbMAix0ACTFnU561ZSgd5ixix6PQvWgFFkJfvxJ-9jzR2iXfPOmAK_8Bgm31ViXCBL3fA1ep2pWzDLI9CnHmOk4YMXWLbpxqjTG168-wgSWp4O1sXTVDv1wWVi_YF5oFBxpC4Kh01QnbJSAHJY8_Y1QTsoc3WMe4XhBprKSaxR9Rlf2qdnDQrxENTmJs-OAVxY331FpZE4KqhrYLQiaYqZTYvu3njihdPMCSayqde7t0rV_Qkm7H9omRdVx_WxXpy-Xc5_WCYsmucFX3K5VWK5eAAHwvdz0oM6Q8n_Hmra5dDa2d8h=w839-h629-no

igRgiQ9CvK4odS47k7kzqeYYSI4Q3EKnj2wQR6_-M64IqqpjsPtQa34M3idgzXqtT85GYRccx9sF1b_xEXQSg5LvL9Bx5tlriizmsZwpPeDPY7QC7vDz9fTrhL_y4yX0AWExfTh4Noxf3sWS-K-Bzcs5HDZaznOoaTGrHBdJhktLR5aBtvugGPgwmWwRSFmdO_fGzQAIQG3TC7OpvRQQC1fpi3yOBBGSAg2szazTzlf_f7VYmt6OAyQfpE8PCiMKtOfGZbEH_TVx0IG7KF6Uekc4x-kdN1KUuu-gQmRQGrfsk9lueHN3TykDrtZAHKiVkUTVC3bXj7NxuvEI5nZM33yl5tXso9Jv68C4xkIEB-qrcwyT0Ay3q2Kt-dxfxApg8MaqoVqVREyFk__8lMlsx_74g8J0xyUHWGztayyMoDpySoWPfY8OqPNktke09CzGyWgUDFYB6mCUSgdXEHhUYyTDUJ-WVNGekbm1bKt_REWXikD1yXbpZOeI9Vx8mYqQJ63oKHX3hmkoRv66sNxswZhd_ND4jAL_zG5bAEOccvHC0xPhncU2kSlziE48MLmoAo5b93dQyfKdDN1Z3YdK4WmDZR2LqeMB-v1FrMLZ6_R4G0yW9ATG0Sgjfd969bAyl5-pSciGFb7Iq0_KX0zM_IiG=w839-h629-no
 
This looks pretty amazing!
Thanks! You made it possible! Now I just need to figure out what I want to do for a controller for fighters. Quick question, do I need the CPS2 4 player harness seperate from the 4-player add on board for the HAS to get a third player working? Right now I have the 4 player expansion board but I don't have a cps2 or konami kick harness. Just curious about what those are specifically for.
 
Quick question, do I need the CPS2 4 player harness seperate from the 4-player add on board for the HAS to get a third player working? Right now I have the 4 player expansion board but I don't have a cps2 or konami kick harness. Just curious about what those are specifically for.
Yes, you'll need a 3/4 player harness for the 3P4P adapter for the HAS. The adapter is just a PCB with two controller ports and a 34pin connector. The 3/4 player harness will plug in to the 34pin connector on the 3P4P adapter and the CPS2 (the same connector you use for the kick harness).

30889160353_f2047ffe65_z.jpg
 
Finally got around to testing the HAS. Thanks @RGB for building this beautiful piece of hardware that allows us to play arcade games at home. I tested a CPS1 board that i have and it worked perfect out of the box.

I'm also looking at getting a pacman and a nintendo vs board and wondering if anyone has tried those out and have suggestions for a suitable midway pcb to jamma adapter and a nintendo vs board to jamma adapter that they could recommend for use with the HAS Supergun.

I found the following pacman pcb to jamma adapters:-

https://riddledtv.com/arcade/jamma_adapters.html#PacPcbToJamma
https://www.mikesarcade.com/cgi-bin/store.pl?sku=PAC2JAMMA
http://www.arcadeshop.com/i/369/pac-man-series-jamma-adapter.htm

For nintendo vs, i found https://www.mikesarcade.com/cgi-bin/store.pl?sku=VS2JAMMA

Any feedback from anyone who may have used any of the above adapters with the HAS would be very appreciated.

Eventually, I want to get https://riddledtv.com/arcade/jamma_switchers.html#6way so that i can keep all the pcb's that I acquire plugged in and be able to switch to the one that i want to play.

I'm waiting for Jamma Extension sets with HAS kick harness support[.7832/url] and hope i can obtain more for use with the HAS and the Jamma Switcher.
 
  • Like
Reactions: RGB
While I can't speak about the specific adapters, I can say...

Order with 100% confidence from all of these vendors. Top notch! I have placed orders with them for a long time.

If you have a problem with your order, they will take care of it.

Jim, Mike, and Steve have helped the arcade community for a long time.

All great guys.

:thumbsup:
 
While I can't speak about the specific adapters, I can say...
Order with 100% confidence from all of these vendors. Top notch! I have placed orders with them for a long time.

If you have a problem with your order, they will take care of it.

Jim, Mike, and Steve have helped the arcade community for a long time.

All great guys.

:thumbsup:
@brentradioThanks so much for validating the resources. As i am new to the arcade stuff, this is really helpful.
 
Yeah, RGB's extender is fantastic. I had to opt for it when they were available.

I also like to use a JAMMA right-angle connector with my HAS. I bought it from shadows on the N-G forums, and it helps with space and organization (originally it was supposed to be for my arcade cabinet and bigger PCB's that barely fit in the PCB bay).

Here's an updated shot of my set-up, with shadow's right-angle connector, RGB's extender, 3P4P and HD-15 add-on board.
CO61pKI.jpg


I love my HAS!
 
Back
Top