What's new

Home Arcade System

SmokeMonster said:
nassekova said:
I think I heard some where (probably was in @SmokeMonster video) that some bootlegs require higher 5v to work. Since they are bootlegs and the quality varies so hard to tell. But you might want to test set 5v bit higher (of course at your own risk).
Click to expand...
I never said anything like that, but thanks for thinking of me ;)
Click to expand...
Weird, I just posted about a board I needed ID'd, and people said it was a bootleg SF2. It was, but it would not boot, so I thought it was broken, but I gave it 5.2v and voila! Now I have a working bootleg SF2.
 
The_A_Drain said:
Thanks, I'll give it a shot nudging it slightly higher than 5v.
Click to expand...
Use a multimeter if you’re going to try this. First the chips need 5v but the measurement on the HAS is at the jamma edge. There may be small drop-off from there, which is why someone would suggest increasing voltage. And we’re talking like 5.08v showing at the jamma edge, to show 5.00v on a chip.

Find a chip on the pcb, look up the pinout, and measure the voltage on that. If it’s under 5v you can tick it up until it’s 5v.

Also those voltmeters have an adjustment knob on them often. It’s a tiny screw, probably on the back, if it has one. Use a multimeter and calibrate it.

91230297-7d8e-4166-92f3-20cb19d8e4ad.JPG
 
SmokeMonster said:
nassekova said:
I think I heard some where (probably was in @SmokeMonster video) that some bootlegs require higher 5v to work. Since they are bootlegs and the quality varies so hard to tell. But you might want to test set 5v bit higher (of course at your own risk).
Click to expand...
I never said anything like that, but thanks for thinking of me ;)
Click to expand...
Sorry, I remembered that your Double Dragon was a bootleg and some how connected those dots in my mind from this video



But yeah, someone / somewhere definitely hinted me that those bootlegs usually need more juice, can't remember who. Clad that it helped xtrasmileys SF2 :D
 
@RGB ... sir, i set until to put the pcb in the HAS on 5.00V and when i plugged the board and power on , it's less than 5 ... sometimes are 4.82 , 475 , 4.92 ... it's any problem if this happen ?
 
opt2not said:
xtrasmiley said:
ItsACerealWow said:
I'm looking to secure my Saturn and/or undamned adapters to the HAS, but I'm having trouble finding the right screws to lock them in place. I initially thought I could simply harvest them from VGA cables I'm not using, but the "handles" are too fat, and even the ones I ordered Digikey didn't work. The HAS FAQ states you need "DSUB screw locks with a 10~11mm long thread." Can anyone here please link me to the correct size and length of screw lock?

Thanks :)
Click to expand...
@opt2not I think had some awhile ago for sale or something. He can probably help you.
Click to expand...
Not for sale, I was giving them away for free!
But i'm all out now.

@ItsACerealWow I got these ones that fit perfectly: https://www.amazon.com/gp/product/B07KWV9YQ9/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Click to expand...
Thanks! They arrived from Amazon and fit both the undamned and Saturn adapters perfectly! :thumbup:
Now what to do with all the extras... ?(
 
ItsACerealWow said:
opt2not said:
xtrasmiley said:
ItsACerealWow said:
I'm looking to secure my Saturn and/or undamned adapters to the HAS, but I'm having trouble finding the right screws to lock them in place. I initially thought I could simply harvest them from VGA cables I'm not using, but the "handles" are too fat, and even the ones I ordered Digikey didn't work. The HAS FAQ states you need "DSUB screw locks with a 10~11mm long thread." Can anyone here please link me to the correct size and length of screw lock?

Thanks :)
Click to expand...
@opt2not I think had some awhile ago for sale or something. He can probably help you.
Click to expand...
Not for sale, I was giving them away for free!But i'm all out now.

@ItsACerealWow I got these ones that fit perfectly: https://www.amazon.com/gp/product/B07KWV9YQ9/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Click to expand...
Thanks! They arrived from Amazon and fit both the undamned and Saturn adapters perfectly! :thumbup: Now what to do with all the extras... ?(
Click to expand...
I'd be happy to buy some from you to not have to order a set for myself! PM me
 
Just wanted to drop a huge THANK YOU to @RGB -- decided to treat myself to an original SF2 WW board & everything is working beautifully. The manual/documentation is great, thank you for making it available in PDF/text. My wired legacy Saturn controller works perfectly. Loving every minute of this.

I own a retro-bit 2.4G wireless Saturn controller and found that it doesn't work when using the SAT2JAMMA adapter; but I noticed the adapter was Atmel-based. I've seen some other controller adapter projects that are similar & use the same microcontroller. Is there any way to upgrade/modify the firmware on the adapter to possibly support the (obv wrong) timings of the retro-bit wireless adapter?

If not, not a big deal, just curious.

Thank you again, having a great time with my HAS. Cheers, keep up the great work!
 
And One said:
Does anyone know if Streetfighter the movie pcb works fine with the HAS supergun? I'm sure it is but just thought I'd ask.
Click to expand...
No, it doesn't work with anything, you should sell me yours very cheaply... :P

I don't know, been looking for a reasonably priced one for 2 years. The other games that run off that PCB seem to work fine, so I would think so.
 
Yes, I can confirm street fighter the movie works no problem with the HAS supergun. Thank you to twistedsymphony for helping me get my SFTM pcb working again.
 
Hey all. Does anyone know if it's possible to adjust the video size using the HAS v4 so the game fills the full screen?
 
For some reason my Tekken 3 gets really bad "green bleeding" with HAS + OSSC + OLED combo. Tekken 1 and 2 work flawlessly. And when playing with Hantarex Polo CRT on my Tekken cabin, it has no problem. I'm not playing this out of the cabinet, but would be nice to know if there is some fix to this or if someone else has the same problem?

It is not the RGB level green since I played with them on the test menu and it does not effect it.

HAS + OSSC with the green bleed
vihreevuoto.jpeg


all_green.jpeg



CRT in my cabinet

kuva_002.jpeg


porfekt.jpeg
 
Hey, not sure what's going here, since I used to own TK2 and TK3 and they worked fine. Have you tried both interlace/non-interlace modes?

PS What video cable do you use?
 
You must log in or register to reply here.
Back
Top