SabreAZ Enthusiast Joined Apr 9, 2018 Messages 301 Reaction score 146 Location Phoenix, AZ May 24, 2018 #1 Hey guys, Does anyone know what connector type with pins I need for the kick harness on a Sega Rev B jamma/JVS I/O?
Hey guys, Does anyone know what connector type with pins I need for the kick harness on a Sega Rev B jamma/JVS I/O?
twistedsymphony Enlightened Staff member Immortal Joined Jul 21, 2015 Messages 11,701 Reaction score 13,168 Location NH, USA May 24, 2018 #2 it's a JST NH series connector. Pretty common for Sega. you can order them directly from JST's website: https://order.jst-mfg.com/InternetS...tedPage=mainContent&countryId=840&language=en FYI you'll want to make sure the jumper is in position "A" to use that connector for input (position B turns it into a lamp output connector)
it's a JST NH series connector. Pretty common for Sega. you can order them directly from JST's website: https://order.jst-mfg.com/InternetS...tedPage=mainContent&countryId=840&language=en FYI you'll want to make sure the jumper is in position "A" to use that connector for input (position B turns it into a lamp output connector)
SabreAZ Enthusiast Joined Apr 9, 2018 Messages 301 Reaction score 146 Location Phoenix, AZ May 24, 2018 #3 Lol, I definitely did not know that. That explains a lot. I was testing using jumper wires and they would not work at all. Thanks for help, as always!
Lol, I definitely did not know that. That explains a lot. I was testing using jumper wires and they would not work at all. Thanks for help, as always!