What's new

MEGA ADAPTERS - Plug and Play PC in SEGA Racing Cabinets

I guess Retrobat would work as it's Windows based.
Steam games would work if controlled via Dinput (not Xinput), here is a compatibility list: https://www.gamoover.net/Forums/index.php?topic=43731.0
CH340 driver is needed for Windows to see the Arduino, then in BackForceFeeder's archive on Github you'll find vjoy 2.2.2 and the latest BackForceFeeder version that you need to install.

Otherwise, njz3 can clone his own SSDs so that you won't have much to do on the software side. Game selection is currently based on Hyperspin.

No problem to order some boards, just PM me.

For 3 player link play, you'll need to setup an ethernet PC network through a switch, not via optical cables.
 
Hi im after getting 2 adapters for my daytona 2 sega model 3 system. Graphics has started to fail on one of them and thinking about the long term, thought best option was pc build. Where can i get 2 of these boards from are they still being made/sold.
Many thanks
 
Hi,
Do you have an IO board in your cab? How are analog controls managed? Can I see pictures of the inside of your cab please?
 
Tibal said:
Hi,
Do you have an IO board in your cab? How are analog controls managed? Can I see pictures of the inside of your cab please?
Click to expand...
I’ll take the pictures tomorrow. It’s a strange cabinet, and I don’t think anything on it is OEM.
 
Tibal said:
Hi,
Do you have an IO board in your cab? How are analog controls managed? Can I see pictures of the inside of your cab please?
Click to expand...

Here you have some pictures.

photo_3_2026-09-28_13-51-42.jpg






Here You can see, there is no IO board... This cabinet was working, but the owner sell to me without any system.


photo_1_2026-09-28_13-51-42.jpg




This is from inside



photo_2_2026-09-28_13-51-42.jpg


;)
 
I don't see where the wires from the wheel and pedals potentiometers go. And what about the Start lamp?
Anyway, I can provide a Mega Adapter with a screw terminal sub-adapter. A solution would be for you to get a Jamma breakout board and connect the wires at the right place on the sub-adapter.

EDIT:
I also have a Mega Adapter with a Jamma edge connector (the one for Fast and Furious cabs) but we'd have to check the pinout, and reroute analog controls and lamps to the dedicated connectors.
Second picture here:
https://www.gamoover.net/Forums/index.php?topic=45336.0
And a newer revision there:
20250105230423-Tibal-20250104_141253.jpg
 
Last edited:
I'm going to check the wiring inside the cabinet, as it used to be fully functional. I don't quite understand why someone would put a JAMMA harness into a Crazy Taxi cabinet. How did they even play the NAOMI cartridge? I have an Atomiswave board and I want to use it to test the current wiring layout
 
You must log in or register to reply here.
Back
Top