ZeroGoukiX
Student
I realized what the issue was. One of the wires broke on the psu cable. I couldn’t see it because it was a black wire on a black plug. Well that solves that lmao
Minigun Supergun - An Open Source Supergun
- Thread starter Frank_fjs
- Start date
bagheera369
Champion
Hey all...I didn't see anything on this, but I could have just missed it.
Will this work with lightgun games, Ie Area 51/Lethal Enforcers, since the guns plug straight to the board?
I'd be running the Retrovision cables to sony 20fs120 via component.
Will this work with lightgun games, Ie Area 51/Lethal Enforcers, since the guns plug straight to the board?
I'd be running the Retrovision cables to sony 20fs120 via component.
bagheera369
Champion
Well....just in case anyone was interested....the lightgun's do indeed work. It wound up being tested on an RCA 27" instead of the Sony.
A51 has some roll over on the screen that messed with the edges...but that was a sync/TV issue, not a gun issue.....it was a pleasant surprise to be sure.
Of further note, Taito F3 worked fine, so did the Seibu SP-1 pcb......the one that didn't was Raiden 2 of all games....but I need to boot the pcb up in a regular cab, just in case something happened to it, since last it was turned on.
the Goat
Grand Master
I sold a bunch of these back in 2020 or so for $110. I imagine component prices are higher now.