Smoothcat
Beginner
I'm still having keyboard as main buttons.
Video works audio works.
I went to the ini files and played 1 and 2 have the keyboard assigned. Dobjust delete all the words? I'm kinda lost
Attachments
Last edited:
MiSTer JAMMA options?
- Thread starter twistedsymphony
- Start date
Video works audio works.
I went to the ini files and played 1 and 2 have the keyboard assigned. Dobjust delete all the words? I'm kinda lost
grendelrt
Enthusiast
- Joined
- Jul 21, 2015
- Messages
- 150
- Reaction score
- 144
You need run a USB cable from thr mister to the jamma adapter, thr input to the right of the yellow av connector.
Smoothcat
Beginner
O wow thank you!!
What part of the mister am I connecting it to? Is it just USB to USB or is it the type c ?
Attachments
msamiullah
Grand Master
Thats not the right way, you either connect a usb b port on board to mister usb a or usb c (rpi) on board to usb a mister
Smoothcat
Beginner
I don't have the cable , going to order off Amazon. This correct? https://www.amazon.com/Amazon-Basic...d=1771465579&sprefix=usb+b+to+,aps,324&sr=8-4
Smoothcat
Beginner
grendelrt
Enthusiast
- Joined
- Jul 21, 2015
- Messages
- 150
- Reaction score
- 144
Sweet! If you use a kick harness and the buttons are wrong you may need to remove the jumpers to the right of the jamma connector.Just found 1!!!!! It works!!!!!! Thank you guys so much,
Smoothcat
Beginner
I got the kick harness working and finally updated my set up. Being able to play fightcade from my cab is a dream
Attachments
1credit
Professional
Showcase cab
Smoothcat
Beginner
One problem I'm having is when I try to play 2 players , both my stick and buttons control 1 player. How can I get player 2 to work?
grendelrt
Enthusiast
- Joined
- Jul 21, 2015
- Messages
- 150
- Reaction score
- 144
On Mister , go the ini and you had to un comment the merge lines that were embossed on the back.
1credit
Professional
To get 2-player mode working on MiSTer when both sticks control Player 1, you must map each controller individually in the main menu, not just inside the game core. Properly define P1/P2 joysticks and buttons, and consider using the no_merge_vidpid setting in your mister.ini file if using identical encoders to stop input merging.
MiSTer FPGA Forum +1
Steps to Fix 2-Player Controls:
Steps to Fix 2-Player Controls:
- Map Controllers Individually: Go to the main MiSTer menu, press F12 (or your menu button), and select "Define Joystick Buttons." Map Player 1 first, then map Player 2.
- Test Input: Use the InputTestcore under Utilities to confirm that the MiSTer sees both devices as distinct inputs.
- Identify Encoders: If you are using dual USB arcade encoders (like Zero Delay USB), the system might treat them as the same device. You may need to identify their Vendor ID/Product ID (VIDPID) to map them separately.
- mister.ini Configuration: Open your mister.ini file and ensure input mapping allows for multiple controllers, as suggested in discussions about 2Player Arcade games on the MiSTer FPGA Forum.
- Arcade Core Specifics: Some cores, like Neo Geo, require you to map both players within the core menu (OSD -> Menu -> Map P2 Buttons) even if you have mapped them in the main
Smoothcat
Beginner
I'm confused by un comment, do I just get rid of all the numbers?On Mister , go the ini and you had to un comment the merge lines that were embossed on the back.
grendelrt
Enthusiast
- Joined
- Jul 21, 2015
- Messages
- 150
- Reaction score
- 144
If it has a ; in front of the line that means the line is commented out. You would make sure those lines don't have comments, then when you launch a game you need map player 1 and player 2 in the controller mappings of the game. When you start a game, if you hit a button on p1 side you should see a pop up at the top saying a controller was detected for p1, then if you hit a button on p2 side it should said the same for p2. Then open the menu and map both controllers for the game.