What's new

Monkey Ball Panel Reproduction

Looks stunning! Are you sharing the files for this one too @nnap? I've almost got my own panel together, I have a panel from @alberto1225, gundam stick, @plasticfactory restrictor disc and purchased all the connectors to crimp my harness. Just need a banana still, was going to print your old model but this new one looks even better!
 
Thanks @nnap the banana turned out great.
 

Attachments

  • IMG_1255.jpeg
    IMG_1255.jpeg
    214.7 KB · Views: 47
the one in my pic is for an original sanwa stick, for a gundam stick he posted the print file on the previous page
 
It is the one with the narrower longer shaft versus the gundam which is shorter. I have a banana design for both versions.
 
Lswanson1049 said:
is the sanwa stick your refering to the JLK GF2 EV?
Click to expand...

I’m not 100% sure but I believe it is the EV version as I had to cut the mounting plate to fit inside the cp. the AT version doesn’t have as big of a mounting plate.
 

Attachments

  • IMG_1284.jpeg
    IMG_1284.jpeg
    155.2 KB · Views: 28
The EV model replaced the AT model. I believe mine is the EV model. The print works perfectly
 
Guys I don't have a clue on 3d printing and was looking at jlcpcb.to get some gundam ones printed.

They have lots of options but no yellow.

Any suggestions on these?

3d technology options:
1000059838.jpg



Material options:
1000059840.jpg



1000059842.jpg



1000059844.jpg
 
I used petg and printed it in black. I then sanded it used high build primer, base (yellow) and clear coat to finish it. No need to print in yellow
 
You must log in or register to reply here.
Back
Top