N64 Cartridge adapter for Seta Aleck 64

[ImportantBet]

Currently making one in the works.

Can anyone with the adapter identify the height from the end of the edge connector to the beginning of the first row of pins (indicated by the yellow lines below)

P.S I have a mobo in transit but got stuck due to Canada Post strike.. so I cant do the measurements on my end

 

[plasticfactory]

If you dont get the measurements by tomorrow I can get them. My setup is currently at the office.

edit: I set a reminder, I'll get it to you tomorrow.

 

[Brakvader]

Currently making one in the works.

Can anyone with the adapter identify the height from the end of the edge connector to the beginning of the first row of pins (indicated by the yellow lines below)

P.S I have a mobo in transit but got stuck due to Canada Post strike.. so I cant do the measurements on my end

Hi,
Will you offer a few ?

 

[ImportantBet]

Hi,
Will you offer a few ?

Yes

 

[Darksoft]

Im in for one.

 

[brizzo]

How about the gerbers instead of measurements?

 

[ImportantBet]

Holy crap that's awesome. Guess I don't need to do anything anymore lol

 

[Darksoft]

Thanks @brizzo

 

[twistedsymphony]

How about the gerbers instead of measurements?

AWESOME! Thank you!

 

[Brakvader]

How about the gerbers instead of measurements?

Hell yeah !!

 

[GF77]

Interesting. So I guess for the console guys this is the way to get native RGB for N64 games albeit quality could be questionable.

The RGB mod on US/JP N64 consoles is pretty easy. Just three jumper wires on the back of the board soldered to the Multi AV Out. But the RGB signal is kinda weak. Nowhere near a Saturn or PSX.

Edit: I just realised that I responded to a three years old post. Oh well...

 

[nam9]

Aleck64 ephemera anyone?

 

[Rob Black]

Im in for one.

Same

 

[ImportantBet]

Same

I just purchased materials. Will be making them soon..

 

[VS_Lilith]

I just purchased materials. Will be making them soon..

Also in Canada, I would be interested in one when you get them going!

 

[ImportantBet]

Also in Canada, I would be interested in one when you get them going!

I've already made a sales thread and they're sold out, sorry.

 

[VS_Lilith]

I've already made a sales thread and they're sold out, sorry.

Ah, no problem! I'll take a look at the gerber file and try to make one myself, where did you get the cartridge slot from?

 

[Simjul02]

Ah, no problem! I'll take a look at the gerber file and try to make one myself, where did you get the cartridge slot from?

You can buy from Aliexpress

 

[Simjul02]

You can buy from Aliexpress

https://fr.aliexpress.com/item/1005008715571774.html

 

[VS_Lilith]

Hey all, looking to order some pcbs to make via the gerber file Brizzo made. Is 1.6mm for PCB thickness okay? Or is the actual cartridge thickness different?