What's new

Namco Noir advice

@AMS did yours not come with the 2 rods?
 

Attachments

  • 20260103_082604.jpg
    20260103_082604.jpg
    134.9 KB · Views: 43
AMS said:
I can make it in fusion 3D if needed so you can print . If made out of abs it should hold perfect in home environment
Click to expand...
@AMS - it’s been a while man! Hope you’re doing well.

Sure. I would love that. It’s for personal use only at home, so 3d print would do just fine. I’m assuming it just connects to a standard barrel lock?
 
  • Like
Reactions: AMS
Yeah all good . Life sometimes gets in the way but still here lurking and still got all my stuff haha.

Yeah it will just snap on the normal lock then . Give me a few days and I’ll post the file here :-)
 
@djsheep exact 1:1

I made punch holes if you ever want to install the rods .
Just print and install and you are all set

Will upload the file to you via PM as it won’t let me upload it here
 

Attachments

  • IMG_5591.jpeg
    IMG_5591.jpeg
    318.4 KB · Views: 37
Last edited:
AMS said:
@djsheep exact 1:1

I made punch holes if you ever want to install the rods .
Just print and install and you are all set

Will upload the file to you via PM as it won’t let me upload it here
Click to expand...
Really appreciate this! I will get a mate to print it and when installed I report back to this thread. Legend.
 
jermz1 said:
@djsheep
https://buyee.jp/item/jdirectitems/auction/x1137142462
Click to expand...
Thank you @jermz1 - I grabbed this. I appreciate you looking out. I had a bit of trouble getting the tang to line up to the locking slot, but a washer in front of the tang piece, just where the end of the lock meets did the trick.

My lock is a MJK branded lock, unsure if it's the original one that came with the machine. Out of curiosity, is there any sort of spacer/washer between your tang piece and the lock? The one I used is a very thin washer but it worked (and reminds me why I keep all these spare screws and crap lying around).

Also, I popped my proxy cherry and used Buyee for the first time for this part; it was so effortless that I’m deleting my account in fears if I keep it that I’ll deplete my bank account on stuff I don’t really “need”.

Massive shout outs also to @AMS for scanning the part and making a 3D print file. I didn’t get around to printing it before @jermz1 pinged with the auction, but surely it will help someone else down the track.
 
Last edited:
2018 Nice !! as Mo has so many I might have to get one here in the UK

And I now work at Bandai/Namco although its mostly new stuff at work.
 
jermz1 said:
@djsheep nice, you even got the rare tag 2 artwork
Click to expand...

The Noir is such a great cab and the only modern cab that's really "clicked" for me. They're so cheap nowadays, they're literally throwing them away... people should really look into them if they're looking for a modern cab. Good bang for buck.

Also, I didn't know that artwork was rare? It was in the bottom of a box of stuff I got from someone and thought I may as well mount it... way nicer than the repro Tekken 7 art I had in there before... if you need a scan or anything, let me know and I can try figure it out.
 
djsheep said:
The Noir is such a great cab and the only modern cab that's really "clicked" for me. They're so cheap nowadays, they're literally throwing them away... people should really look into them if they're looking for a modern cab. Good bang for buck.

Also, I didn't know that artwork was rare? It was in the bottom of a box of stuff I got from someone and thought I may as well mount it... way nicer than the repro Tekken 7 art I had in there before... if you need a scan or anything, let me know and I can try figure it out.
Click to expand...
The noir is a tank and it sounds amazing tbh.

Yes, especially one thats not faded from the light. The Tekken Tag 2 Unlimited marquee is more common. I appreciate it, but I have the artwork as well. The artwork im looking for now is the oversized T7 and T7 R2 marquees. Then I'll be complete.
 
You must log in or register to reply here.
Back
Top