What's new

FS Nanao MS9-29 Chassis ---> Konami Windy Adapter Kits

For Sale
jcmorrisii

jcmorrisii

Grand Master
Joined
Aug 20, 2015
Messages
353
Reaction score
753
Location
Orange Park, FL USA
Hey everybody! :)

Im currently working on the logistics of offering these kits to the community. Iv been asked about these a lot in the past. I have made a few in the past that myself and other friends have used, but wanted to make a cohesive "kit" for the community to have access to. Im sending out one of these to a community member today to check compatibility etc.:thumbup:

The purpose is to adapt the wiring on a stock Konami Windy tube / yoke to fit a Nanao MS9. I.e. To make it so that you can easily replace a unrepairable Toshiba PB6643 with a Nanao MS9-29.

The kit includes:

[astrocity]1x Horizontal Yoke adapter
[astrocity]1x Degauss Adapter
[astrocity]1x Neckboard Ground Extender
[astrocity]1x Remote Board Adapter Plate (This allows for you to mount your Nanao remote board in the control panel area where the Toshiba remote originally was mounted)

This thread will serve as a interest check so I can see how many parts I need to initially acquire. If you have interest in one of these, please let me know by posting below and stating how many you want.

Cost will be based directly upon my material costs and how much we buy, and I will know EXACT numbers after I gauge interest. Im hoping to keep the price at $20/per kit but that requires me to make a minimum purchase to keep overhead low. :thumbsup:

Please feel free to respond with any questions you may have, and Ill do my best to respond in a timely manner. Thanks @Kidkaos for inspiring me to make this happen. Ill be attaching some pics later. <3

Interested Parties:

@TritonDrew 2 units
@thegreathopper 1 unit
@8bitforlife 1 unit
 
Last edited:
jcmorrisii said:
Hey everybody! :)

Im currently working on the logistics of offering these kits to the community. Iv been asked about these a lot in the past. I have made a few in the past that myself and other friends have used, but wanted to make a cohesive "kit" for the community to have access to. Im sending out one of these to a community member today to check compatibility etc.:thumbup:

The purpose is to adapt the wiring on a stock Konami Windy tube / yoke to fit a Nanao MS9. I.e. To make it so that you can easily replace a unrepairable Toshiba PB6643 with a Nanao MS9-29.

The kit includes:

[astrocity]1x Horizontal Yoke adapter
[astrocity]1x Degauss Adapter
[astrocity]1x Neckboard Ground Extender
[astrocity]1x Remote Board Adapter Plate (This allows for you to mount your Nanao remote board in the control panel area where the Toshiba remote originally was mounted)

This thread will serve as a interest check so I can see how many parts I need to initially acquire. If you have interest in one of these, please let me know by posting below and stating how many you want.

Cost will be based directly upon my material costs and how much we buy, and I will know EXACT numbers after I gauge interest. Im hoping to keep the price at $20/per kit but that requires me to make a minimum purchase to keep overhead low. :thumbsup:

Please feel free to respond with any questions you may have, and Ill do my best to respond in a timely manner. Thanks @Kidkaos for inspiring me to make this happen. Ill be attaching some pics later. <3

Interested Parties:

@TritonDrew 2 units
@thegreathopper 1 unit
@8bitforlife 1 unit
Click to expand...
Hey, would you still have these kits available? I would be interested in buying two.
 
Last edited:
Bumping this as I am about to start making a final batch. Please reach out now if you are interested in one and are not on this list. If you are on this list and changed your mind, please tell me now so I can remove you. So far this is who I have down:

Final list, amount of units ordered, Paid/Not Paid Status Current ( June 16th, 6:40am EST )
1: @demonik x2 units DOWNPAYMENT + SHIPPING PAID :thumbup:
2: @JohnRambo'sKnife x6 units PAID IN FULL :thumbup:
3: @imbord3rlin3 x2 units PAID IN FULL :thumbup:
4: @300wins x1 unitsPAID IN FULL :thumbup:
5: @cruzlink2 x1 units
6: @DRAGONKZ x1 unitPAID IN FULL MINUS SHIPPING COST :thumbup:
7: @wigsplitta x3 units ( 1x for @thegreathopper ) PAID IN FULL :thumbup:

Thanks everyone!
 
Last edited:
wigsplitta said:
Cool.

@jcmorrisii please update me to three, and i'll work it out with thegreathopper in due course
Click to expand...
Done, and thanks!

Iv got everything finalized and begun printing all the adapter plates.

This is a last call for this batch, as Im going to go ahead and start collection of payments. If you are more comfortable sending a non-refundable downpayment, rather than paying in full up front, thats fine too. :)

The kits will be $25/ per unit. If you would prefer to do a downpayment, it would be $10/per unit. This includes:

The kit includes:

[astrocity]1x Horizontal Yoke adapter
[astrocity]1x Degauss Adapter
[astrocity]1x Neckboard Ground Extender
[astrocity]1x Remote Board Adapter Plate (This allows for you to mount your Nanao remote board in the control panel area where the Toshiba remote originally was mounted)

I will begin sending out direct messages this evening to all those on the list, to inform that the process is beginning and that funds are being requested. Feel free to message me anytime if you dont want to wait.

Once the parts arrive early next week, I should have anyones order complete within 5 days and ship everything the following business day.

Please reach out with any questions. Thanks again everyone.
 
You must log in or register to reply here.
Back
Top