What's new

FS Primal Rage PCB Enclosure - Preorder/Interest Check

For Sale
I think I was one of those people?

I had one secured on your previous run but gave up my spot to someone else as I thought I’d secured a full cabinet, but that fell through and I also missed out on a case due to giving up my spot 😆
 
plasticfactory said:
I'm checking all my boxes here, given all the projects going on -- I may do another run of these due to sparse interest.

I will be making some design changes related to the the side pieces as the acrylic tolerances were too inconsistent. It caused serious frustration making the initial batch and I learned a lot.

I know of at least 3 people PM'd me about these, and I owe @Mitsurugi-w one, but don't remember who messaged me [it's been year(s)]

Just post if you want one. If there are at least 5 people I will adjust the design, make another run, and, as promised, publish the files.
Click to expand...
Haha. great, now I feel a need to find myself a pcb.
 
Are you still making these I’m gonna need one, but there’s a catch my board is a dev Primal Rage which is bigger than the standard one. I can post some pictures for you to check the size. There’s also a dongle I use for the sound on the bottom right of the board. The board is also on a metal plate that’s on the bottom of it, and I was told not to remove it or the whole thing may fall apart

Let me know if you would be able to make a case or need more pictures for it
 

Attachments

  • 39BC558F-A214-46FF-A711-E3347CA1978A.jpeg
    39BC558F-A214-46FF-A711-E3347CA1978A.jpeg
    535.1 KB · Views: 51
  • FDD8323A-D812-4D72-9469-990D6C0524A5.jpeg
    FDD8323A-D812-4D72-9469-990D6C0524A5.jpeg
    489.1 KB · Views: 47
  • E38EA3D1-05C3-4E21-9E1F-E1F9A9CEB6CB.jpeg
    E38EA3D1-05C3-4E21-9E1F-E1F9A9CEB6CB.jpeg
    279.1 KB · Views: 50
  • IMG_4451.jpeg
    IMG_4451.jpeg
    507.1 KB · Views: 45
I haven't made any more since my last post, but I bought the materials to do a few more. Unfortunately, from looking at the pictures I do not believe it would fit.
 
Ok thanks for the reply. It is bigger than a standard PR board which was already pretty big to begin with just let me know if you ever decide you can do one.
 
If you need another buyer to justify another run - you can add me. I'll just have to wait around find myself a working Primal Rage PCB.
 
Last edited:
Chaotic-Strike said:
Are you still making these I’m gonna need one, but there’s a catch my board is a dev Primal Rage which is bigger than the standard one. I can post some pictures for you to check the size. There’s also a dongle I use for the sound on the bottom right of the board. The board is also on a metal plate that’s on the bottom of it, and I was told not to remove it or the whole thing may fall apart

Let me know if you would be able to make a case or need more pictures for it
Click to expand...
Dang that's awesome. Never seen PR Dev board.
 
HornheaDD said:
Dang that's awesome. Never seen PR Dev board.
Click to expand...
Thanks I got it from Chris Tang personally who previously owned the board and worked on Primal Rage 1 and 2. I made sure he checked to see if there was anything worth dumping on it before he sold it to me.

I was told there wasn’t anything worth dumping on besides it being the later Japanese revision with better inputs on it, which is still pretty rare.
 
Surprised by some of the renewed interest in this. No promises on when I can finish them but the following is done:
- a stack of the red plates
- bags of all the printed parts
- ~50% of the hardware

I ordered some of the black acrylic to do the panels, but not enough based on the interest. I will order more and the hardware in the next week or two, and when I can get to the laser cutting will do so.

The price will go up a bit, and the kits will probably not include the original extras as before. TBD.
 
You must log in or register to reply here.
Back
Top