What's new
By:
Filters

Problem IRC Arcade cabinet confidential mission

N

naunaure

Beginner
Joined
Mar 26, 2016
Messages
22
Reaction score
1
Hello,
I have a confidential mission upright on which I run several systems.
I have a calibration problem.
I changed the I / O by a functional type 3. okay
I changed the gun board and it's OK.
I changed the bezel by a functional one.
The problem is that by plugging the bezel, I have only one LED in the middle bottom and in the middle of top. (I checked my tensions and I have 12.4 and 4.8) ..
The last time I tried in game, the x and Y axis moves, the complementary buttons work.
However, the target is hashed and does not go anywhere on the screen.

Has anyone ever met this problem?
Or searched now?
Can the leds grill?
 
Last edited:
naunaure said:
I have only one LED that turns on and it is the first.
Click to expand...
the LED modules are all chained together, so assuming your GUN SENSE board is good then either your first or second LED module is bad or you have a bad harnesses between the GUN SENSE and LED Module 2
 
Thank you for the feedback.
But I forgot to say that only the middle led down and up works.I changed two leds, but it's still the same....
 
I recovered a functional bezel (tested) but it seems to me that it does not work.
I'm putting back the LEDs and for now, I have a chain of four.
It comes from leds
 
So, I can turn on 3 leds and the signal doesn't pass anymore.
The following works because tested and I changed the cables but nothing, no signal
 
how do you know the bezel is functional?

how do you know your gun sense board is functional?
 
The gun sense has been tested on a virtua cops 3
Same for bezel...


when I start the game, the leds go out
 
Last edited:
naunaure said:
when I start the game, the leds go out
Click to expand...
maybe you have a power supply problem? or maybe a problem with the harness between the gun sense and the bezel.

the game has NO control over the LEDs at all, the Gun sense board runs completely independent of the rest of the game hardware.
 
You must log in or register to reply here.
Back
Top