What's new

Ridge Racer V Force Feedback Patch

Works perfect on them 100 doller 246c's from alliexpress
 

Attachments

  • 20231009_172614.jpg
    20231009_172614.jpg
    65.9 KB · Views: 172
Franco23444 said:
What I/O are you using? I was able to navigate the test menu just fine using both my original Namco FCA pcb and the NA-JV2 I/O
Click to expand...

after trying it in a Tekken 5 cab and still didn't allow me to do anything in the service menu, I figured it out, by reading the manual ! shocker!
Your normally have a test and service switch ... but RRV also has an select button AND a up/Down button! will try and rig that up


rr5.jpg
 
Does this eliminate FF? What about intermittent in-game ERROR 7 for those of us still running the dedicated arcade cabinet on route? :)

ERROR 7 pops up even when It's not pots, bad wiring, bad psu, bad motor, bad motor board, or bad 246A.
 
davesarcades said:
Does this eliminate FF? What about intermittent in-game ERROR 7 for those of us still running the dedicated arcade cabinet on route? :)

ERROR 7 pops up even when It's not pots, bad wiring, bad psu, bad motor, bad motor board, or bad 246A.
Click to expand...
Do you know when this error pops up? Like around specific hour? I did run RRV for at least 2 hours and it ran just fine
 
Franco23444 said:
Do you know when this error pops up? Like around specific hour? I did run RRV for at least 2 hours and it ran just fine
Click to expand...
The error occurs when the pot sends a value to the logic which it does not anticipate. Much like how a triforce with reset if you send it a pot signal from steering it does not allow (full 360 motion for example). New pots did not address it. Usually only when kids (99% of the people who play it) are too aggressive with the wheel does it pop up. It's at a non-supervised location right now and I've just sold the machine to a friend who runs a freeplay supervised arcade so he'll be able to power cycle it or w/e it needs should that error pop up in the future, instead of it being out of service for a full day because of error 7.

Namco does this with a lot of their racing games which have force feedback and it is a total pain for street operators like myself. Dependability is king. Another great example is Mario Kart GP.
 
Mrhide said:
This one was the issue:

IMG_8878.jpeg



First lg drive, not working
IMG_8881.jpeg

gave this error:
IMG_8884r.jpg

Then this one
IMG_8880.jpeg


Gave me this!



Thanks again! This was fun!
(And no, the force feedback does not work but i still can’t navigate the test menu…)
Click to expand...
Still doesn't work for me! Even with the same drive
 

Attachments

  • IMG_20231207_144644.jpg
    IMG_20231207_144644.jpg
    126.7 KB · Views: 128
  • IMG_20231207_144649.jpg
    IMG_20231207_144649.jpg
    73.1 KB · Views: 143
Check this out!

Here's something that some of you might need to know if you have the FFB Board for the game :

  1. Setting the dip switch 4 on will seem to bypass some stuff if you’re using the patch, however, turning it off (default) will give you MONITOR ERROR 10.
  2. If you are planning on using the patch and the original setup, then you will have to flip dip 4 to the on position on the FFB board.

    Here's an image for reference :
    IMG_3621.jpg

    Thanks to @Franco23444 for the image and this info!
 
lorizzuoso said:
Today I'll be releasing the force feedback patch for Ridge Racer V!

This game requires several components to run but thanks to this patch you can now play it with just your I/O board!

Here are some screenshots! :
Screenshot_2023-09-28_00-56-57.jpg
Screenshot_2023-10-01_02-57-10.jpg
Screenshot_2023-10-01_02-59-51.jpg


And a video of the game in action! :


Screenshots and video are made by @Franco23444.


Download Here!
Click to expand...
hello link do not work are there any other way to download the file? thnaks a lot
 
I'd also love to try this but the link no longer works.
 
Last edited:
You must log in or register to reply here.
Back
Top