Hi I can't figure out my problem...
I have 2x sega jvs type 1 i/o.
Both turn on, are recognized by naomi board that reads fw version and other data, but I can't get any key to work even in input test.
Wired a db15 port following ags pinout (joystick leds are turning on too)...
Powered with 5v AND 12v, even if I guess that without lamp out 12v are useless.
Used 2 different usb cables.
Same Naomi work flawlessy with jvs 2 jamma.
I have 2x sega jvs type 1 i/o.
Both turn on, are recognized by naomi board that reads fw version and other data, but I can't get any key to work even in input test.
Wired a db15 port following ags pinout (joystick leds are turning on too)...
Powered with 5v AND 12v, even if I guess that without lamp out 12v are useless.
Used 2 different usb cables.
Same Naomi work flawlessy with jvs 2 jamma.
Attachments
Last edited: