I wanted to play around with one of these, but I've had two of these show up, work for an hour or less, then go completely dead. I gave up and moved on.
So whats next on the list of multis?
- Thread starter Derick2k
- Start date
penrhos
Grand Master
they're very voltage sensitive - more so than the 60-in-1 pcb and the micro-sd's aren't the best quality so it's easy to kill them.
IGS PGM would be cool even if it's just a knights of valour and cave platform. A lot of value there too since cave pcbs go for thousands now, just give me a heads up so I can pick up a PGM before the price spike.
Nimmers
Grand Master
heh, Darksoft how much for a tip on what I need to stock up on
zero238
Grand Master
Need to deposit your gold bars to darksoft's swiss bank account.heh, Darksoft how much for a tip on what I need to stock up on
Brentradio
Champion
Aren't we all doing that already...Need to deposit your gold bars to darksoft's swiss bank account.heh, Darksoft how much for a tip on what I need to stock up on
My gold bars, credit cards, all the loose change from my couch, every other paycheck, the kids lunch money...
That made my day
deep
Student
I'm in Switzerland, I can take care of it !Need to deposit your gold bars to darksoft's swiss bank account.heh, Darksoft how much for a tip on what I need to stock up on
Nimmers
Grand Master
Is that the secret? I keep trying to jam $400 in my Neo geo but that doesn't work...Need to deposit your gold bars to darksoft's swiss bank account.heh, Darksoft how much for a tip on what I need to stock up on
Brentradio
Champion
Huh, it worked for me... Oh I see your problem Brent -- Neo carts have two pcb's inside them but you've only got your bills connected to one of the connectors. You gotta fold the bills in half and stick the other end in the 2nd pin connector, then you're all set!
deep
Student
Agree, also works with swiss francs, tested and aproved !
SNK-NEO-GEO
Enlightened
wanted to give some feedback on the CPS1 case.. the case is perfect with my Sf 2 hyper fighting.. I have final fight, magic sword and area 88 which the case does not fit well because the lower board is longer than the upper board.. I am not sure if my boards are boot legs or because there are two versions of the lower board.. what you end up is with no screws on the front since the holes do not line up and about 17% of the board exposed..I am able to mout the board but it is only secured by two screws, two holes that line up..
the SF2 hyper lower and upper boards are the same sides and the four screws holes line up nicely to mout the board on the cases.. any how just wanted to let others know just in case that you are panning on ordering.
the SF2 hyper lower and upper boards are the same sides and the four screws holes line up nicely to mout the board on the cases.. any how just wanted to let others know just in case that you are panning on ordering.
Attachments
Last edited:
PascalP
Legendary
Nice @SNK-NEO-GEO!
And yes, the very first version of the A board are longer (and tend to fail more than the shorter ones...)
Basically CPS1 A board comes in 3 flavours:
- Long Board, 10 MHz
- Short board, 10 MHz
- Short board, 12 MHz (called 'Dash')
And additionally you could add a fourth flavour:
- CPS 1.5 board with Q sound
And yes, the very first version of the A board are longer (and tend to fail more than the shorter ones...)
Basically CPS1 A board comes in 3 flavours:
- Long Board, 10 MHz
- Short board, 10 MHz
- Short board, 12 MHz (called 'Dash')
And additionally you could add a fourth flavour:
- CPS 1.5 board with Q sound
SNK-NEO-GEO
Enlightened
good to know.. thanks
Joko3
Enlightened
Where do I look to see if I have a 10 or 12? I believe mine is a 12 because I purchased it along with a Hyper Fighting B board. I let the B-board go when I got my CPS2 multi, but kept the A board to use with Final Fight.
J
jassin000
If it came with hyper fighting it's a cps1' (cps1 dash) aka 12mhz board.
Joko3
Enlightened
That's what I was thinking, but I wanted to know if there was a way to tell for sure via serial number or something.