What's new

the Goat

Professional
Joined
Dec 7, 2018
Messages
613
Reaction score
396
Location
Vermont, USA
3. I'm still waiting on more DB15 version to come in from my assembler (which is ok because I'm not done preparing the plastic cases for them, anyways). I expect to begin shipping those out early next month.


-ud
I hope to buy some from the next batch. Is this the place where availability will be announced?
 

Velyks

Student
Joined
Jul 31, 2019
Messages
58
Reaction score
6
Location
London
Scrub question, didn't see the answer on the first few pages. Where can I order one of these internationally? Looking to get two of the USB->DB15 decoders in the UK.
 

Raph_friend

Professional
Joined
May 28, 2017
Messages
587
Reaction score
414
Location
Brazil
Support for Victrix Pro FS has been added to the UD-USB & UD-CPS2 firmware (1.4d). This update also allows Qanba Dragon and Obsidian to run in PS4 mode (previously, they only worked in PS3 mode). Sadly, I've not yet resolved the PS4 Hori Fighting Edge. Hopefully included in next update. Still "beta," as there are a few more controllers I'd like to address for the next major release, but here it is if you want to give it a spin:

https://udgametech.blogspot.com/p/firmware.html

--ud
Anything about HORI VLX PREMIUM PS3?
 

archimage

Happy
Grand Master
Joined
Feb 14, 2017
Messages
801
Reaction score
581
Location
France
hori vlx works fine for me, I changed to akishop ps360+ works fine too
 

undamned

Multi Baez
Champion
Multi Boyz
Joined
Jul 22, 2015
Messages
1,081
Reaction score
2,023
Location
AZ, USA
Anything about HORI VLX PREMIUM PS3?
I don't have access to one at the moment. I thought I tested one many years ago and only problem was default button mapping was off. What is yours doing (sorry if you already mentioned it and I forgot)?
-ud
 

Raph_friend

Professional
Joined
May 28, 2017
Messages
587
Reaction score
414
Location
Brazil
Anything about HORI VLX PREMIUM PS3?
I don't have access to one at the moment. I thought I tested one many years ago and only problem was default button mapping was off. What is yours doing (sorry if you already mentioned it and I forgot)?-ud
It is a small problem, DOWN is holding when the controller is connect, so i have to press HOME and works fine, problem is when i have to boot the PCB some times haha
 

sofakng

Beginner
Joined
Jan 18, 2019
Messages
34
Reaction score
3
Location
USA
I'm still trying to decide between the terminal block and DB15 versions...

I'm looking at the DB15 page on Paradise Arcade Shop and it mentions supporting the Player Select Jumper and alternate headers for LED signals, etc. Are these typos, or do you need to open the case and they become available?
 

sofakng

Beginner
Joined
Jan 18, 2019
Messages
34
Reaction score
3
Location
USA
I'm still trying to decide between the terminal block and DB15 versions...

I'm looking at the DB15 page on Paradise Arcade Shop and it mentions supporting the Player Select Jumper and alternate headers for LED signals, etc. Are these typos, or do you need to open the case and they become available?
In addition to my above questions, can anybody tell me the default mapping of Neo Geo buttons to Dualshock 4 buttons? (i.e. 'A' -> Square, 'B' -> Cross, etc)
 

lupinko

Student
Joined
Feb 5, 2016
Messages
121
Reaction score
34
I'm still trying to decide between the terminal block and DB15 versions...

I'm looking at the DB15 page on Paradise Arcade Shop and it mentions supporting the Player Select Jumper and alternate headers for LED signals, etc. Are these typos, or do you need to open the case and they become available?
In addition to my above questions, can anybody tell me the default mapping of Neo Geo buttons to Dualshock 4 buttons? (i.e. 'A' -> Square, 'B' -> Cross, etc)
What do you want exactly? If you want authentic NeoGeo, there’s three different kinds.

AES/MVS
BCD
A

NeoCD
CD
AB

KOF2003/SvC PCBs/“KOF Layout post NeoGeo”
AC
BD
 

GeeDee

Professional
Joined
Jun 2, 2019
Messages
366
Reaction score
387
Location
Kodak, TN
Has anyone started a list of the currently supported/unsupported controllers? I'm gonna be bringing more and more hardware out to my locals soon and I'd love to make some kind of graphic to bring along with me for instructions encase I'm not always next to my setups. If there isn't one already, I'd be more than up for starting a little google doc support list if people want to chime in with what controllers they've used/seen used on their stuff! :D
 

undamned

Multi Baez
Champion
Multi Boyz
Joined
Jul 22, 2015
Messages
1,081
Reaction score
2,023
Location
AZ, USA
Has anyone started a list of the currently supported/unsupported controllers? I'm gonna be bringing more and more hardware out to my locals soon and I'd love to make some kind of graphic to bring along with me for instructions encase I'm not always next to my setups. If there isn't one already, I'd be more than up for starting a little google doc support list if people want to chime in with what controllers they've used/seen used on their stuff! :D
Long ago, I had the intention of creating such a list, but because my drivers are not specific to a particular controller (only specific types, i.e. X360, PS3, PS4, XBONE), it makes it a bit hard. My experience has been that about 95% of controllers within those categories works fine and then I just have to pin down the oddballs. It would actually be much easier to make a list of currently unsupported controllers.
-ud
 

GeeDee

Professional
Joined
Jun 2, 2019
Messages
366
Reaction score
387
Location
Kodak, TN
Has anyone started a list of the currently supported/unsupported controllers? I'm gonna be bringing more and more hardware out to my locals soon and I'd love to make some kind of graphic to bring along with me for instructions encase I'm not always next to my setups. If there isn't one already, I'd be more than up for starting a little google doc support list if people want to chime in with what controllers they've used/seen used on their stuff! :D
Long ago, I had the intention of creating such a list, but because my drivers are not specific to a particular controller (only specific types, i.e. X360, PS3, PS4, XBONE), it makes it a bit hard. My experience has been that about 95% of controllers within those categories works fine and then I just have to pin down the oddballs. It would actually be much easier to make a list of currently unsupported controllers.-ud
And I've read about that, you really are doing great work and I appreciate all that you do, I just want to be able to give the people coming to tournaments a little more confidence is all. My last outing at a local of mine was the first trial run of bringing out real hardware, and we only had a few hiccups along the way with which controllers worked, which didn't, which needed remapping, etc. Very very few issues, but every time there WAS an issue, I got called over for guesswork lol. I really wish I would have thought to write down the names of the parts they had. It probably would be easier just to have a small handful of "these specific sticks won't work." Just a little list I can leave out by the setups so I can at least be confident in saying "if you have 'x' it's not my problem" :P

Would you be fine with something like this? : Supported List Doc

I could just add extra columns when a new firmware comes around, or just axe the sections in green if you're not concerned with a huge list of currently working controllers.
 

undamned

Multi Baez
Champion
Multi Boyz
Joined
Jul 22, 2015
Messages
1,081
Reaction score
2,023
Location
AZ, USA
I've been quiet regarding the new batch of DB15 UD-USB Decoders because I'm basically at wit's end. 2 boxes arrived at my local DHL center at the beginning of the month. Only 1 box was put on a DHL truck and delivered. The delivered box contained 20 out of 500 units (480 units in the undelivered box). Since then, I've called DHL frequently for updates. As of today, they are claiming the undelivered box is "lost." There's about 2 months of work in that box, and now it's "lost" somewhere in my own city.

I'll update if anything changes. I'm basically at stage 4 of the Kübler-Ross model, so I'm not ready to start a replacement order. It's possible someone will trip over it at the warehouse and it will be delivered, but I'm not holding my breath.
-ud
 

Frank_fjs

Multi Boyz 4 Lyfe
Legendary
Multi Boyz
Joined
Mar 3, 2018
Messages
3,431
Reaction score
5,808
Location
Australia - Adelaide
:(

That's horrible. They could have at least lost the smaller box and delivered the larger box.
 

djsheep

Multi Boyz Overlord
Legendary
Multi Boyz
Joined
May 20, 2016
Messages
5,296
Reaction score
6,939
Location
Brisbane, Australia
Damn. Sorry for your loss bro. That’s gotta hurt. Hopefully it turns up.
 

Plastic

Student
Joined
Sep 14, 2018
Messages
67
Reaction score
10
Location
Lake Geneva WI
Man that sucks. I've been waiting for over a year now :/.
 
Top