theoddtech
Enthusiast
theoddtech - PCB/PIC/COMPONENTS/USA/1X = Full kit
Which is what worries me, if you look at the original article, it is in french and it does not exactly describe what I call a DIY project at all. If anything, the ebay URL provided for each item is not accurate. (Specifically these capacitors, they range from $10 to $60)I would urge to reconsider this project a bit, these two lines of the BOM are very revealing:
1 x 100nf (0.1μF) 50V 105C Capacitor * (10 μF Alternative)
1 x 22 kOhm 1/4 Watt Resistor * (22 Ohm 1/4 Watt Alternative)
10uf and 0.1uf are NOT the same, at all, same with 22ohm vs 22,000 ohm.
At least get the gerbers and BOM verified by the original author before pulling the trigger on money and orders, it's likely that some changes/updates are needed. As it stands, I would rate the chances of this working 'out of the box' to be very low.
I tried to translate from french (don't know a single word in French other than merci) and update quantities.
Since I'm not earning a single dime from this project, I ask you to cooperate to complete this.
1st step of cooperation can already be done, it's a double check of above list for errors
2nd step of cooperation is suggest sources for components, all over the world it's not important
3rd step of cooperation is suggest PCB printers to compare prices
If anybody can help please let me know.
Please allow me to repeat that if someone has better idea on how to do this / wants to lead this group buy I have absolutely not intention to oppose! It would be actually better if someone with electronics skills lead this! Much better than me!
This is my mail to Aganyte.Hi
I'm actually trying to put together a "group buy" of 15 gun2naomi kits, because with 15 units we can lower individual cost of gerber printing.
I already have 15 people interested (2 of them already have your pic).
They are asking me if the tutorial written here (http://www.gamoover.net/tuto/gun2naomi) is complete and correct, since someone noted the 2 mentioned differences between your values of a condenser and a resistance and those used by the guy who wrote the tutorial (pistol board, 0,1uF vs 10uF condenser and 22kohm vs 22ohm resistance).
Could I ask you please if that tutorial and mostly gerber files are correct? Why those differences?
It would be great if you could tell me because we all would like to know this before proceed with orders (pcbs printing, pics by you, components...).
Let me know pls.
This is it.Aganyte' said:Hi,
The tuto is correct, no mistake. there's two values mentioned because me and Iro doesn't have the same result. You can try one value, and if don't work, try another.