Tracking on the jamma edge connector. Is the multi that just came out is that part of the kit that comes with multi board?That big block with half a sticker on it is the FD1094 encrypted CPU. You need to replace that with a standard 68k and then you’re ready to go.
You also need yourself an S16 adapter, that’s not a JAMMA edge.
@xodaraP yes I am aware of the S16 to Jamma adapter. My question is does the multi come with the replacement 68k chip?No. You'll need a seperate S16 to JAMMA adapter. @Frank_fjs makes a nice one and they can be had on eBay etc.
Just don't plug a JAMMA harness on without an adapter or you'll be looking for a new motherboard for your multi kit.
Ok just a 68K eprom chip and a way to program it which I think I have. I have this device.No, you need to source your own 68K.