Hi All,
I've started working on my own version of yet another Naomi 1 consolisation and starting a thread to document progress
Current progress: Internal network connector
SCSI, DB9 and ethernet port removed
RJ45 breakout board with connector installed
- PCB pins and spacers to clear the LAN transformer behind
Next stage is to quieten the fans then remove or move most, if not all, the filter board components.
Oh and make a few more tweaks to the netdimm case so that the interface card is held properly.
I know its a bit of work but are there any issues with moving the EMI components to the inside of the filter board?
Internal Network Connector
I've started working on my own version of yet another Naomi 1 consolisation and starting a thread to document progress
Current progress: Internal network connector
SCSI, DB9 and ethernet port removed
RJ45 breakout board with connector installed
- PCB pins and spacers to clear the LAN transformer behind
Next stage is to quieten the fans then remove or move most, if not all, the filter board components.
Oh and make a few more tweaks to the netdimm case so that the interface card is held properly.
I know its a bit of work but are there any issues with moving the EMI components to the inside of the filter board?
Internal Network Connector
Last edited: