pacoarcade
Professional
Is there any problem if you use "too much" copper like inductance or some electrical issue? let's say 4x 16 AWG and 6x 16 AWG copper cables for +5V and GND, respectively. I'm currently using <10 inches 18 AWG copper cables but I'm always open to improve my setup.
About the ghosting, I run a THS7374 based video driver circuit and the image had ghosting. I solved it using a 100uF capacitor in the +5V/GND legs of this video IC as the datasheet recommends.
About the ghosting, I run a THS7374 based video driver circuit and the image had ghosting. I solved it using a 100uF capacitor in the +5V/GND legs of this video IC as the datasheet recommends.