- Thread starter Cat
- Start date
PM @Mitsurugi-w
@twistedsymphony looks like you are out of stock.When will you have more CPS3 cases?
People are asking, so there is some interest there.
People are asking, so there is some interest there.
Last edited:
I don't have an ETA on new cases but if people want to send me a inquiry through the website: https://bit-district.com/contact-us.html I can make sure they're added to the notification list when more stock is available.
@twistedsymphony can you recommended which screws to use with your case?
If you buy a case from me they're included, but if you're printing your own I recommend #4-24 Thread Size, 3/8" Length which is similar to the screw size of the original carts.
FWIW my case is even designed to work with the origina cart case, so you can use the original front and 3D printed back, or vise-versa (same with STV)
FWIW my case is even designed to work with the origina cart case, so you can use the original front and 3D printed back, or vise-versa (same with STV)
@twistedsymphony do you mind sending a link to the exact screws that you include?
I buy them in lots of 10,000 so probably more than you want to spend.
Can i buy some from you?
dude, just drive to Home Depo, or Lowes, or Tracktor Supply and spend $1 on a bag of them.
For those waiting for cases I am printing a new batch now.
I really can only print 1 case per day and I've got I think 8 people on the waiting list, so don't expect to get notified until January at the earliest.
I really can only print 1 case per day and I've got I think 8 people on the waiting list, so don't expect to get notified until January at the earliest.
Are they already available? Thank you
that was over 3 years ago, they're long gone.
yes, the design has been available since the beginning here: https://www.thingiverse.com/thing:1690059
Any 3D print solutions?
thanks for the link
For anyone looking for CPS3 cases, please check this.
