Yup, someone had posted a direct link to roms I think which is a no no
Last edited:
- Thread starter Darksoft
- Start date
@twistedsymphony
Pretty much done, I can add 2 holes that extend to the ones on the corners of the filter board.
Pretty much done, I can add 2 holes that extend to the ones on the corners of the filter board.
We have repeated that many times, we dont want to see links to roms on our site. We will delete all the links that we find.Yup, someone had posted a direct link to roms I think which is a no no
Lemony Vengeance
Champion
Oh man, I’d dig one of these too!@twistedsymphony
Pretty much done, I can add 2 holes that extend to the ones on the corners of the filter board.
how are you going to incorporate P3/P4 button 3 from the JAMMA edge?Pretty much done, I can add 2 holes that extend to the ones on the corners of the filter board.
Lemony Vengeance
Champion
That’s actually a good question. I (personally) am not above running jumper wires to the correct positions on the CPS2 kick socket.
As Lemony suggests, the only way to do it, in this case, is to run 2 jumper wires.
Also, what 3P/4P games use button 3??
Ideally, I would like to remake the filter board and move some things around a bit, add a few things, but I would have to get info from Darksoft. Better yet his files for the filter board, or we can suggest changes and he or Mitsu sell these mod filter boards.
Maybe we should do a suggestion thread as to what you want to see on the filter board?
Last edited:
Slam Masters
You might want to put a little space between the two solder pads.So it would look like this with the extra pads for B3s
Anyone care to give it a try? I can upload the gerbers
I personally would have no problem with the current spacing. But some people are not a skilled with an iron as you an me.
Lemony Vengeance
Champion
You might want to put a little space between the two solder pads.
I personally would have no problem with the current spacing. But some people are not a skilled with an iron as you an me.
That should do it. Modified it a bia and added vias to the castellated/half holes, just in case.
And checking the fitment, not bad for a first go at it
Gerber is attached in case anyone wants to try it
Last edited:
JohnRambo'sKnife
Champion
Looks ace Derick.
Looks like we got @jassin000 certificate of compliance and it's even higher than cps2 on his list. This can only be good news and to me it means that Cps1 multi is going to be even more popular than cps2 multi
MostroVeneno
Grand Master
I NEED LAUGH REACTION PLEEEEASE MODS
GeorgeSpinner
Professional
IMO the CPS1/1.5 has the better games. Before everything in arcades was about 1v1 fighting games.Looks like we got @jassin000 certificate of compliance and it's even higher than cps2 on his list. This can only be good news and to me it means that Cps1 multi is going to be even more popular than cps2 multi
If fighting games are your thing, that's cool. But I always liked playing WITH my friends and not against them.
I suspect the DarkSoft CPS1 will become (if it's not already) THE multi that EVERYONE wants.
It was worth the wait.
I put my kit together today and installation was very straightforward. Damn, this is an awesome multi! It is quite evident that a whole lot of time and thought was put into making this the ultimate solution for CPS1/1.5.
As Lemony suggests, the only way to do it, in this case, is to run 2 jumper wires.
Also, what 3P/4P games use button 3??
Ideally, I would like to remake the filter board and move some things around a bit, add a few things, but I would have to get info from Darksoft. Better yet his files for the filter board, or we can suggest changes and he or Mitsu sell these mod filter boards.
Yeah wih my adapter you would need to solder two wires for Button 3 on slammasters as well.
I originally was going to redesign the filterboard to sell but we decided that it would be very expensive for the end user to buy compared to what I decided to do instead. The only way I could see it being worth the extra cost is if you were able to incorporate the undamed decoders into it and allow plugging usb controllers directly into it.
