Hi Saliams sorry to hear you can not run the darksoft cartridge despite new cap and PSU .Dear @Darksoft i wish you a happy new year and wish you all the best for you and team Darksoft
i came back to have your feedback about my cartridge, it doesn't work even with all the advises and modification on my console (AES 3-5, new caps 2200Uf and new power supply)
So if there is any solution or hope to make it work please let me know also there is any news about a new firmeware maybe its possible de have something that could help with it
Have a nice day
Ciao
Hi Saliams sorry to hear you can not run the darksoft cartridge despite new cap and PSU . What is the voltage on the PSU on the barrel ? You have on original PSU 5.45v and in my case this was to low to avoid glitches and mesure 5v after the regulator .I used a PSU were you can set the voltage to 5.6v and it solved the glitches issue for me.
Yeah thanks i'm very careful when it's about my Neo Geo so i want make a thing i'm not familiar with i just asked @Royalsystemcrt if he got something else , maybe my PSU is not enough good/powerful ? what do you think ?Be careful with the voltage, the important value is the one measured in the chip. If you go too high things won't work properly and if you go too high, you may fry something.
Thanks that workedMake sure your Xeno Crisis files are in a subfolder named “xenocris” in the Games folder.
Cool, I'll shoot you a DM.You can send it to me and I can look at it.