What's new
By:

MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

Flain said:
No idea, the obvious question is does it happen with other boards? Have you tried remapping the controls, both in the core main (before loading a core) and in the core you're playing?

How is that control stick connected, is it via the jamma harness? I only ask as i can't really tell from the video, it doesn't look like jamma but i can't see everything.
Click to expand...
With other pcb games no problem. I tried to remap from the menu but it just move the problem to other button, and sometimes I have to push 3 times a button before having a response. When I am remapping in the core it doesn’t work.
The control stick is connected to the supergun which is connected to Mistercade through a jamma. I there anybody having a HAS supergun who has tested in the Mistercade ?
 
@raffy92 please provide a picture of the cable from your supergun to the JAMMA connector. Does your cable looks like this ?
 

Attachments

  • sigma.jpg
    sigma.jpg
    210 KB · Views: 57
The SIGMA connectors have a small fault, they do not supply GND to pins 27,28, e and f.

You should solder on GND to lthese as well.
 
rtw said:
The SIGMA connectors have a small fault, they do not supply GND to pins 27,28, e and f.

You should solder on GND to lthese as well
Click to expand...
You mean the specific cable that link the controller to the control box ?
 
I see, but I don’t think it will resolve my problem, because I have the same kind of issue when I am using a HAS v5.0 with the Mistercade.
 
It is good that you have a proper GND on your SIGMA.

I believe I have tried Mistercade but on HAS 4.0, IIRC there were no issues.

Just to clarify, your problem is that while pressing button 1 sometimes button 2 will register as well ?

How are you powering your SIGMA and Mistercade ? Pictures please :)
 
rtw said:
It is good that you have a proper GND on your SIGMA.

I believe I have tried Mistercade but on HAS 4.0, IIRC there were no issues.

Just to clarify, your problem is that while pressing button 1 sometimes button 2 will register as well ?

How are you powering your SIGMA and Mistercade ? Pictures please :)
Click to expand...
I am powering the sigma by the psu which is inside the supergun. I am using the Mistercade through the jamma and the supergun psu
 
rtw said:
It is good that you have a proper GND on your SIGMA.

I believe I have tried Mistercade but on HAS 4.0, IIRC there were no issues.

Just to clarify, your problem is that while pressing button 1 sometimes button 2 will register as well ?

How are you powering your SIGMA and Mistercade ? Pictures please
Click to expand...
In the menu or in game I have sometimes to press the button 1, 3 times to have a response
 
Can you snap a picture of the power-plug you use for the SIGMA and a picture of the power supply inside the SIGMA itself ?
 
Thank you, so this means that you do not have any earth/ground in your system. Is there a label on the power supply that you can share a picture of ?
 
rtw said:
Thank you, so this means that you do not have any earth/ground in your system. Is there a label on the power supply that you can share a picture of ?
Click to expand...

ok I will take a picture this evening
 
You must log in or register to reply here.
Back
Top