xodaraP
Legendary
I’m pretty sure the ZuluSCSI is made by the same creator as the SCSI2SD because they were no longer able to source parts
I’m a big fan of the BlueSCSI though
I’m a big fan of the BlueSCSI though
replacing scsi cd-rom drive with scsi sd card adapter?
- Thread starter SelfDeniedHoarderz
- Start date
Yeah bluescsi works good for me too.
Orakelschaf
Enthusiast
Just to be sure: "BlueSCSI v2 Desktop" works with the CPS3?
my cps3 multi was working today now its stuck at reading cdrom screen and i cant access menu at all
i think my scsi bus controller is ether bad or the solder has gone cold
mR_CaESaR
Champion
Are you having a similar issue like this?
https://www.arcade-projects.com/thr...-scsi-sd-card-adapter.300/page-36#post-321309
If so, the fix for mine was reflowing the SD card area as Cruzlink mentioned
https://www.arcade-projects.com/thr...-scsi-sd-card-adapter.300/page-36#post-321309
If so, the fix for mine was reflowing the SD card area as Cruzlink mentioned
not unless both my bluescsi and scsi2sd both developed the problem at same time
it just sits at looking at cd screen but if flex or press the scsibus chip i get what that link describes. i can quickly enough get into menu when i flex or press chip it tells me theres no files and it hangs
cruzlink2
Grand Master
reflow the chip it might have bad solder joints.
atm with my condition i cannot attempt to do it. im sending it to someone ill ordered a new chip just incase.
msamiullah
Professional
Hi Darksoft, can you share the link of the product for those of us who are not super familiar with each product line from BlueSCSI
msamiullah
Professional
Orakelschaf
Enthusiast
BlueSCSI V2 Desktop works with a CPS3 - You only need SCSI cable, no power cable required.
(bought one 2 months ago and added it to a friends CPS3)
Be aware that it may not fit into a case (or you need some tinkering) since it has a large footprint. (I added one to a Jason customs case with a custom made 3d Print)
(bought one 2 months ago and added it to a friends CPS3)
Be aware that it may not fit into a case (or you need some tinkering) since it has a large footprint. (I added one to a Jason customs case with a custom made 3d Print)
msamiullah
Professional
I have BlueSCSI V2 Desktop ordered, is there any guide on setting this up ? like formatting the card and mounting the ISO ?
Orakelschaf
Enthusiast