Search results

Hey I swear I did my best googling first. Can anyone recommend the standard case screw replacements in the Capcom CPS2 B board specifically? I don't need the torxs specifically just the same size/type.

WAIT! Hear me out. So I have two Sega Blast Cities. One came with prewired JVS power connectors one did not. 1. On one cabinet, my naomi powers up and runs fine, both via JVS power connectors and Capcom I/O powered. 2. On the other cabinet black screen, using capcom I/O power, naomi powers...

So I get impression it's totally doable, but I want to make sure I'm doing it safely. Should I just tap into the +5v and -5v on the Jamma? If so would it be ok to splice into the harness or maybe solder onto the Jamma male? I'm using a Naomi 1 with a Capcom I/O in this cable, with the Raspberry...

Sorta at the end of my rope with this thing. I bought a Naomi2 with Netdimm off here a long time ago pre-setup for netboot. I finally got around to messing with it over the last month or two and for the life of me I can't get past the "error 01 game not compatible with mainboard". I opened up...

Hey all, just looking for Capcom CPS2 A and B shells in reasonably good shape. At least 2 of each. Thanks.

I'm looking for a few different things. CPS1 Magic Sword complete Willow complete anything in general, but complete. I dont have an existing system. CPS2 - B/Gr only A board - I need additional Green/Blue A board my budget is around $120 D&D SOM D&D TOD AVP Open to other games already have...

Sort of a shot in the dark here - On both my cga to hdmi converter and cga to vga converter the following boards have a jumpy scrambled picture mvs jamma taito pcb arpicade however atomiswave and cps2 work fine. all boards work fine in a regular jamma cab. I read somewhere these scalers like...

I removed all the screws, but the chassis is still held down by plastic and metal clips. How do I remove this thing?

I have a Square Multi Design G-balance with a multi Jamma/JVS setup however it's missing the conversion I/O listed in the manual. The main cabin has JVS and Jamma Plugs per the manual, however my cab is basically missing all of it. It only has this little conversion board and thats the catch...

Im actually not looking for anything in particular just reasonable prices. The only cart I have is Ranger Mission.

Apologies, I'm sure somebody has asked this, but I can't find it because I'm stupid. I appear to have a vewlix with Fast I/O wiring. Is there an inventory list of the JST connectors for it? I'm tracing down the wiring and trying to figure out what I need to order. It would be a lot quicker if...

I thinking about designing a couple things for my personal cab and I'm curious if anyones already done this? 1. Darksoft Capcom Play System II MULTI plexiprint Marquee? I've googled around and I saw someone had a cabinet with a CPSII generic Marquee, but it looks more like concept art than...

HSS sent me these in the box with the kit. Are these for securing the boards maybe? There werent any instructions or anything. If they are can someone show me an example or something please?

Nightwarriors Darkstalkers board Rev 3 PalF Board was a suicided battery melt functioning fine with a infinikey. I removed the infinikey and installed the multiboard, formatted sd provided by HSS, copied rom rollup basic. One rom did boot MVC unlocked with jailbars. I read that the roll up is...

Im doing A Darkstalkers: Nightwarriors revenge Revision 3 Pal F. This suicided a million years ago and I recently fixed it with a infinikey. Do I need to take it off?

Hi, I'm nathan and I live in Denver. I just recently got into a arcade stuff last year after finally biting the bullet on some broken cabs on craigslist. I only have have one completed restoration project and 3 or so in flight. I came here from reddit, but mostly I hang out on KLOV. Capcom CPS2...