naomi

Hi everyone, I don’t know much about pricing for the original Naomi but I would like to be able to have a MVC2 and CVS2 set up in my Astro city. Someone I know is willing to sell me a set up compatible with my cab. It would include the flowing: Naomi 1 mother board capcom JVS adaptor...

Hey All, I have recently purchased a Sega Naomi universal that was completely stripped of all original electrical wiring. I am attempting to rewire it and make it closer to the Japanese style candy cabinet. My question is i don't know the correct way to wire up the coin meter to get it to work...

Here, https://github.com/hachirokumiku/hacknaomi/blob/main/pong.bin I made pong. it kinda slow. did it with libnaomi... I also got fappy bird working kinda too but its no fun.

Hey All, Looking for some sega naomi universal parts. Feel free to reach out if you have anything. Red light cap on bezel Entire bezel if possible 2 hoofs for front legs metal housing for bottom shelf NOA 4001x black plastic housing that covers crt Located in Toronto, Canada

Hello, since my previous thread (still in TODO) i understood that my netdimm is not working, cartridges are working fine. When i insert the netdimm, only two leds on the bottom board lights up, and the naomi (also the naomi 2) error 01 is still present. Leds on the daughter board lights up for...

Hi all, I've been troubleshooting a GD-Rom drive on my Naomi 2 board for the past couple days and i can't seem to get stuff working as it should, i feel like i've tried everything but no matter what i do, i get an Error 21 [The game is not acceptable by main board], which according to the...

I have 2 available. $250 each shipped to anywhere in USA. Removed from working Initial D 3 machines.

This gonna sound dumb but I had my Sega Naomi with a Raspberry PI flasher working in my Blast City, using a Capcom I/O and it got taken apart when I moved around 4-5 years ago. I've completely forgotten how it's supposed to be wired. I think I have most of it right, but if someone could take a...

hi! i´m selling button wiring for astrocity, blastcity, naomi, etc stick and buttons 1, 2 and 3: 20€ four butons (for MVS): 22€ buttons 4, 5 and 6: 20€ kick harness for, RGBpi, PC, cps1, cps2, recalbox...: 19€ all the wires can be for astrocity or blastcity or naomi etc...

Hi! Thanks for clicking. Backstory: I've been looking for an Naomi Universal for more than 5 years. I was ready to pull a trigger on one machine back in 2020, days before that thing happened. So the deal fell through. Actually I'm glad, since it lacked a lot of stuff but for 250€ it wasn't all...

Introduction So, lets say you are one of the MANY owners of a Crazy Taxi Naomi Universal upright cabinet and you're thinking to yourself "Crazy Taxi is great, but I wish I could play other JVS driving games too without missing out on anything and I don't want to cut any original wiring or re-pin...

Sorry in advance if this if the wrong play to ask this, but I figured this group might be the most knowledgeable about this subject. I have this Street Fight Zero 3 upper marquee that I’m sure is real based on the print dot patterns under magnification. But it has this odd layer of plastic...

I'm trying to set up a Naomi with Marvel Vs Capcom 2 in one of my head to head setups and I'm really struggling to get P1 and P2 button 6 working correctly. I tested this in my linked Blast Citys and in my New Versus City and got the same results. I'm using a Sega 838-13683-91 JVS to Jamma...

Hi there. I am looking to get my hands on a fully functional Naomi 2 system with the bios already updated to 4.02 multi bios, and the Chip 0-Key (although I don't think that's officially needed with the netdimm for home-booting) I'm pretty much looking for a turnkey system, I want to open the...

I've just whipped up a coin input mech assembly for the Sega Naomi and Net City series of cabinets. As usual, the switch comes from a worn out Seimitsu LS-40 mech. You can probably use any old switch in there. Enjoy! Latest version will be here...

https://twitter.com/gameparts_korea/status/1727246306115252325 I've tested new JVS-IO for two DB15 arcade sticks. And works fine on Taito Type X3. The sample board has a Raspberry Pi Pico, but the product will have rp2040 ic. (Because the Pico lacks 4 GPIOs) I hope this board will also work...

Hi, I have a Crazy Taxi cart up for grabs. Was tested in a Naomi 2 working, though the cartridge needs to be snug in order for the system to read it. So many hilarious prices on eBay for like $900 lmao gotta love scalpers and retro game collecting nowadays. Asking $370 US shipped OBO. Please...

Hi, Just wanted to reach out to anyone who might be interested in upgrading their Gundam stick to offer the same travel as an og Monkey Ball setup. The main factor here is the restrictor disc (purple) residing in the base of the unit. Gundum units are 40mm outer diameter while MB is 45.5mm...

Thanks

.