A Freeware Taito TypeX2 Multigame.
- Thread starter Niko
- Start date
SNK-NEO-GEO
Enlightened
Where did you purchase the fun? Please
jugu
Professional
I think he means fan but usually you can purchase a hooked for fun.
SNK-NEO-GEO
Enlightened
I am 100% on my iPhone which does all types of interesting typosI want to know too.more fun, please!
corey
Professional
defor wrote:
it is better just on original drives there isnt supported drivers for the video card. Also when you update the drivers other games break eg. Samurai spirit sen.
This is the original fan that came with my Vewlix FC: cndc12d7v
I tried both of these with good results, the first one although spec wise is very similar to the OEM one, to me sounded quieter, it didnt bother me as much as the oem one. The second was much quieter being a lower RPM of course.
NF-F12 industrialPPC-3000 PWM
NF-F12 industrialPPC-2000 IP67 PWM
Since the oem fan was directly spliced in, I crimped my own jst connectors for the new fans in case I ever want to replace them.
I tried both of these with good results, the first one although spec wise is very similar to the OEM one, to me sounded quieter, it didnt bother me as much as the oem one. The second was much quieter being a lower RPM of course.
NF-F12 industrialPPC-3000 PWM
NF-F12 industrialPPC-2000 IP67 PWM
Since the oem fan was directly spliced in, I crimped my own jst connectors for the new fans in case I ever want to replace them.
Last edited:
jugu
Professional
Thank you for this! Any reason why you chose the PWM fan models versus the 3 pin models?This is the original fan that came with my Vewlix FC: cndc12d7v
I tried both of these with good results, the first one although spec wise is very similar to the OEM one, to me sounded quieter, it didnt bother me as much as the oem one. The second was much quieter being a lower RPM of course.
NF-F12 industrialPPC-3000 PWM
NF-F12 industrialPPC-2000 IP67 PWM
Since the oem fan was directly spliced in, I crimped my own jst connectors for the new fans in case I ever want to replaced them.
Glad to help, I am sure you can find similar replacement fans. I just happen to like Noctua fans.
Niko
Champion
Hey, So those games arnt "official" TypeX2 games. They where games that where ported to the TypeX2 by Joerg and require his multigame to run properly. I thought about porting them, but I want to keep the focus of my multigame to official TypeX2 games.
So just like above, mame was ported to the TypeX2 for use with Joerg's multi. Which will not work on my multi. There has been discussion about making a mame port for my multi, but the way mame handles input is very annoying and is hard to interface with programmatically. Maybe one day someone will make a mame port for my freeware multi.
The industrial 3000 rpm fan which is similar in specs to oem only comes in PWM, plus those are meant for constant server type operation, so figure it was the best bang for the buck when compared to the oem.
freddiefiasco
Professional
Is that Arctic Alpine Pro CPU fan a direct fit to the processor on the TTX2 board?
It needs to be slightly trimmed because of the big caps close to the CPU but otherwise works perfect.
I have a 80mm exhaust fan next to the CPU and. 140mm exhaust fan at the side.
Runs silent and cool.
devil138
Beginner
@Niko thanks for you answer.Hey, So those games arnt "official" TypeX2 games. They where games that where ported to the TypeX2 by Joerg and require his multigame to run properly. I thought about porting them, but I want to keep the focus of my multigame to official TypeX2 games.So just like above, mame was ported to the TypeX2 for use with Joerg's multi. Which will not work on my multi. There has been discussion about making a mame port for my multi, but the way mame handles input is very annoying and is hard to interface with programmatically. Maybe one day someone will make a mame port for my freeware multi.
At the first Pic in your first Post in this thread MAME was listed in the Gamelist ? i thought it will run.
It depends what you understand with direct fit]Is that Arctic Alpine Pro CPU fan a direct fit to the processor on the TTX2 board?
the plastic frame where the fan is mounted, touches slightly with one annoying capacitor close to the CPU, it needs to be trimmed half a mm or so (it's soft plastic, so it's easy), the cap also touches slightly the heatsink I decided to dremel the heatsink around half a mm as well, just to be on the safe side.
The good thing is that its a 92mm fan, and it cools not only the CPU but the surrounding capacitors. The fan cools up to 85W TDP, therefore it's perfect for the 651 and it's very silent.
The OEM Thermaltake 70mm fan is horrible loud.
Niko
Champion
Yea, at the time I was trying to get it ported but kept having issues, then got side tracked and pulled into other projects. :/@Niko thanks for you answer.Hey, So those games arnt "official" TypeX2 games. They where games that where ported to the TypeX2 by Joerg and require his multigame to run properly. I thought about porting them, but I want to keep the focus of my multigame to official TypeX2 games.So just like above, mame was ported to the TypeX2 for use with Joerg's multi. Which will not work on my multi. There has been discussion about making a mame port for my multi, but the way mame handles input is very annoying and is hard to interface with programmatically. Maybe one day someone will make a mame port for my freeware multi.
At the first Pic in your first Post in this thread MAME was listed in the Gamelist ? i thought it will run.
freddiefiasco
Professional
That will work for me. Thanks!It depends what you understand with direct fit]Is that Arctic Alpine Pro CPU fan a direct fit to the processor on the TTX2 board?
the plastic frame where the fan is mounted, touches slightly with one annoying capacitor close to the CPU, it needs to be trimmed half a mm or so (it's soft plastic, so it's easy), the cap also touches slightly the heatsink I decided to dremel the heatsink around half a mm as well, just to be on the safe side.
The good thing is that its a 92mm fan, and it cools not only the CPU but the surrounding capacitors. The fan cools up to 85W TDP, therefore it's perfect for the 651 and it's very silent.
The OEM Thermaltake 70mm fan is horrible loud.
devil138
Beginner
Hi,
Arcana Heart 2.1, Suggoi! Arcana Heart 2.6 and Tetris Grand Master 3 don´t work.
Run the games with you ?
Arcana Heart 2.1, Suggoi! Arcana Heart 2.6 and Tetris Grand Master 3 don´t work.
Run the games with you ?