Maverick1978
Student
Hi folks... I'm looking for a few things on my Blast City (Sega Bass Fishing) build:
1. Jamma/JVS loom ( 600-7143-001 , aka 001 loom ) I know that Ken has these new, but at $200, it's a bit out of my budget atm. That's a fall-back, but it'll be awhile before I can afford that in the budget.
2. 5575 key and 2 locks. I have 2 locks. My cab is missing the lock on the CP, and the lock on the coin mechs is an after market. I'd be happy with even just a key if someone has a spare, but ideally, would like to restore the locks too if the price is right
3. the coin chute that routes coins from the CP to the coin mech (I couldn't make out the part on this from the manuals, sorry!) - I realize that this is a long shot and I'll likely have to try and DIY one, but hey...worth asking!
In lieu of an 001 loom, if anyone knows of a pinout for that loom, I'm not above crimping one up. I've not been able to find a full pinout of the loom, however.
This is my first cab, and it's not THAT far from getting up and running. My MS2931 chassis is getting repaired, and technically, all I really need is the jamma/jvs loom after the monitor is taken care of. I'm fast discovering that this is NOT the hobby to get into when you're on a limited budget, laugh... but it's fun
1. Jamma/JVS loom ( 600-7143-001 , aka 001 loom ) I know that Ken has these new, but at $200, it's a bit out of my budget atm. That's a fall-back, but it'll be awhile before I can afford that in the budget.
2. 5575 key and 2 locks. I have 2 locks. My cab is missing the lock on the CP, and the lock on the coin mechs is an after market. I'd be happy with even just a key if someone has a spare, but ideally, would like to restore the locks too if the price is right
3. the coin chute that routes coins from the CP to the coin mech (I couldn't make out the part on this from the manuals, sorry!) - I realize that this is a long shot and I'll likely have to try and DIY one, but hey...worth asking!
In lieu of an 001 loom, if anyone knows of a pinout for that loom, I'm not above crimping one up. I've not been able to find a full pinout of the loom, however.
This is my first cab, and it's not THAT far from getting up and running. My MS2931 chassis is getting repaired, and technically, all I really need is the jamma/jvs loom after the monitor is taken care of. I'm fast discovering that this is NOT the hobby to get into when you're on a limited budget, laugh... but it's fun