What's new
By:

FOUND Capcom IO feet

Item has been found
kikaso

kikaso

Enlightened
Joined
Jul 4, 2020
Messages
2,019
Reaction score
3,469
Location
New York City
Been looking for months now and can’t find these. Hoping someone here has a spare set theyre willing to part with. Thanks!

7D898867-5CE7-4307-AADD-C88D579AEC7C.jpeg


FE1ECACD-EE43-4DF6-B81A-FDB643D33D26.jpeg
 
I’ve never seen those type! I’ve only seen the “flat” style. What’s the extra height for? Would this sit over the Sun PSU?
 
I’d definitely grab some of those if anyone finds em or decides to repro.
 
I have a set that I wouldn't sell, but I can take pictures or dimensions if someone is actually doing a repro.

another option would be to use the regular style flat feet... and then just use some wood or angle irons or something to create stilts.
 
KaPH33n said:
another option would be to use the regular style flat feet... and then just use some wood or angle irons or something to create stilts.
Click to expand...
Yeah that’s my plan if I can’t the original/reproduction set or a more elegant solution.
 
This is something that could possibly be 3D printed too.

How tall are these again?

EDIT: So I modeled this. It's 125mm tall and it should clear a Naomi with a Netdimm on it. I test printed a stumpy one and it came out fine. I modeled the width and cutout based on CPS2 feet, I want to say they're compatible?

Remember to print with supports, so the square cut out doesn't deform.
 

Attachments

Last edited:
nem said:
EDIT: So I modeled this. It's 125mm tall and it should clear a Naomi with a Netdimm on it. I test printed a stumpy one and it came out fine. I modeled the width and cutout based on CPS2 feet, I want to say they're compatible?

Remember to print with supports, so the square cut out doesn't deform.
Click to expand...
Wow, this is fantastic. Thanks so much for taking the time to model and test.

Not being experienced with 3D printing, what’s the recommended material?
 
kikaso said:
Not being experienced with 3D printing, what’s the recommended material?
Click to expand...

I printed mine with just regular PLA. It looks flimsy, but it's surprisingly strong. If you don't have your own printer, maybe wait for someone to confirm that it's actually the correct size. I don't have a Capcom IO here to test it out unfortunately.
 
nem said:
I printed mine with just regular PLA. It looks flimsy, but it's surprisingly strong. If you don't have your own printer, maybe wait for someone to confirm that it's actually the correct size. I don't have a Capcom IO here to test it out unfortunately.
Click to expand...
I don’t have a printer so I’ll wait. Thanks again!
 
Unfortunately I don't have a printer at hand anymore... I didn't look at the design on the 3d print closely, but if you put chamfers or fillets where the corners are it will be a lot stronger. The original design is stamped out of sheet metal... but still has those little indentations to give more stability and strength to the legs.
 
That's true. Initially I was thinking it was a non-issue as the board weighs maybe, I don't know, 400 grams? But then I thought of all the wiring pulling down on it. So yeah, good point. If someone can verify fitment and size, I'll redesign it.
 
The tabs for the Capcom IO are wider than the Capcom CPS-2 feet. I have a bunch of feet for CPS-2 and they don’t fit right in my Capcom IO at all.
 
You must log in or register to reply here.
Back
Top