Cave CV1000 3D printed cases

[XtraSmiley]

I'm on it. Will test with my undumped Matsuri PCB for good measure.

Doing God's work.

The rarer the PCB the more likely to get static destruction...

 

[kasaski]

Any chance you could build these a bit taller @kasaski ?

Like a fully enclosed version covering the heatsink/capacitor?

Oh crap, I didn't even consider static. Hmm, can someone test out by walking on a carpet on a dry day and see what happens?

FWIW my study where i do all this is fully carpeted and ive dragged my pcbs in the cases across the floor while testing fitments . Anyway, wouldnt the static of the acrylic cases be equally if not more of a problem. ive never heard anyone killing their pcb with one, the bottom parts of those are fairly close to the underside of the pcb.

 

[kasaski]

Enough ventilation for those concerned? Uploaded to the makerworld page

 

[kasaski]

Ive also added an additional foot model for those wanting to mount within a cab, which can be swiveled and tucked away on the underside when not needed

 

[rewrite]

Enough ventilation for those concerned? Uploaded to the makerworld page

This looks really slick.

Like a fully enclosed version covering the heatsink/capacitor?

Like tall enough maybe I could stack another board above it.

 

[kasaski]

This looks really slick.


Like tall enough maybe I could stack another board above it.

I'll make another alt model for the top that is 1cm taller, should be plenty of extra space

 

[kasaski]

This looks really slick.


Like tall enough maybe I could stack another board above it.

is this enough?

 

[kasaski]

Uploaded taller models to maker world

 

[rewrite]

is this enough?

Beautiful. Now I can finally have a Cave themed microwave. Thank you for this last gift of 2024.

 

[nem]

is this enough?

I see what you did there.

Actually, if you flipped every other board, you could fit four inside. A Cave 4-in-1. I suggest keying your Jamma connector if you attempt this.

 

[rewrite]

Actually, if you flipped every other board, you could fit four inside. A Cave 4-in-1. I suggest keying your Jamma connector if you attempt this.

FINALLY we have a Cave multi. All these years and we just needed a 3D printer.

 

[Dloop]

On the note of static; I was not stating it was a problem I was asking if people knew more before just jumping the gun I however feel sad I had already printed a case now that the multi exists xD and the one with more wents And my white color ended Hehe. @kasaski since you have a bambu as well, is it possible to get an AMS version where we could print the logo in red? White + Red would look like the intro screen

 

[kasaski]

On the note of static; I was not stating it was a problem I was asking if people knew more before just jumping the gun I however feel sad I had already printed a case now that the multi exists xD and the one with more wents And my white color ended Hehe. @kasaski since you have a bambu as well, is it possible to get an AMS version where we could print the logo in red? White + Red would look like the intro screen

Ive been eyeing an AMS for a while so ill start playing around and make a print profile for it

 

[Dloop]

Ive been eyeing an AMS for a while so i start playing around and make a print profile for it

Woop woop! I should have waited damnit xD

 

[Dloop]

@kasaski I'm not seeing your edited models on makerworld. It's still only showing the three parts you had initially

 

[kasaski]

I havent updated the print profile .3mf yet, can you see them when downloading individual stls?

 

[Dloop]

Cool, yup there they showed up. Not used that before in makerworld, just open in studio hehe.

 

[jepjepjep]

This is a great case. Thanks for sharing the model. There is one outlier pcb, mushihimesama, that has the vga port populated:

 

[rewrite]

There is one outlier pcb, mushihimesama, that has the vga port populated

I mean the easy option is remove the DSUB connector.

 

[XtraSmiley]

I mean the easy option is remove the DSUB connector.

Just wiggle it off with pliers.