XtraSmiley
Legendary
Yes of course, agree 100%. I just didn't think about the dump being sent to the new owner. If we got it and no dump, of course we'd dump that shit like a hard night at a cheap taco bar!
Cave CV1000 3D printed cases
- Thread starter kasaski
- Start date
Share the color edit
It probably wouldn't work because the AMS materials would be different. All I did was load up the stl file, and used the "Color Painting Tool" -> "Fill" tool with edge detection and default parameters. Then you can select your filament color and click on the area to color. Here's where it's located in the software:
kasaski
Professional
that colour edit looks great
Lemony Vengeance
Champion
This is pretty neat I have shock boxes for my cave PCBs, but this is really really slick. it would be really cool to have VHS-style sleeves for games in these shells
I have shock boxes for my cave PCBs, but this is really really slick. it would be really cool to have VHS-style sleeves for games in these shells
kasaski
Professional
Ive been targeting that vhs style on the spine stickers, I need to get around to working in the rest of themThis is pretty neat
kasaski
Professional
Nice idea, ill put a cover together sometime that mates up nicely with the case
XtraSmiley
Legendary
Not to keep adding on requests, but what about a door that opens on a hinge like the front of the original NES?
msamiullah
Grand Master
Thanks for doing this, this stuff is amazing, is it possbile to add vented dsub 1cm ?Hi All,
I've always disliked handling bare PCBs, especially my CV1000 PCBs so I've created a printable shell for them. This is a much more affordable (and in my personal opinion, nicer looking) option over the laser cut shells that are available.
I'm sure with the higher availability of these games now these will be useful to the community
You can download the model from makerworld.
I'm currently also working on some nice spine stickers which i will upload at a later date. Its quite difficult to find high quality art of my liking that i want to use on the spines, hopefully high quality kit scans are shared eventually.
Alternative Labels by @nnap: https://drive.google.com/file/d/15is4sJoShbVbmIg7eG2XAahnEb1PZEZ7/view?usp=sharing
Preview pics (please note I have since added a hole to access the volume pot)
WIP Labels:
Otachi_R1X
Student
Anyone have an issue with the screw holes on the top shell being covered with a thick layer of plastic that's impossible to get through without drilling?
Check my post #29. Perhaps you have the same problem.
Lemony Vengeance
Champion
I’ve recently dialed in my 3D printer and felt confident enough to print these out:
Printed the extended top so they can slide right ins out of the slipcovers I’m going to design for them.
Multicolor white
Matsuri blue (lol I wish)
SDOJ mint
Deathsmiles Magenta
They’ve turned out great!
Topping them off with @PASTBLASTER ’s Jamma edge covers.
Thank you for designing these, @kasaski !
Have spine labels for the taller shells been designed?
Printed the extended top so they can slide right ins out of the slipcovers I’m going to design for them.
Multicolor white
Matsuri blue (lol I wish)
SDOJ mint
Deathsmiles Magenta
They’ve turned out great!
Topping them off with @PASTBLASTER ’s Jamma edge covers.
Thank you for designing these, @kasaski !
Have spine labels for the taller shells been designed?
Last edited:
Mickysmoke
Professional
Man them boxes take the piss. The white ones 
arcadecollector
Enthusiast
does anybody sell such a white case ? LMK please
scaryhours
Student
I’ve recently dialed in my 3D printer and felt confident enough to print these out:
Printed the extended top so they can slide right ins out of the slipcovers I’m going to design for them.
Multicolor white
Matsuri blue (lol I wish)
SDOJ mint
Deathsmiles Magenta
They’ve turned out great!
Topping them off with @PASTBLASTER ’s Jamma edge covers.
Thank you for designing these, @kasaski !
Have spine labels for the taller shells been designed?
If you do the spine logos before sending, you're a step above god.