CPS1 Multi. Official Thread

[Mitsurugi-w]

You need two extensions if you want both player 3 and 4

 

[Kujako]

You need two extensions if you want both player 3 and 4

Kind of you to assume we have friends to play with (really I have only a single player panel on my Vewlix).

 

[kidrivers]

Will we have to desolder the original dip switches and solder in the wires for the extension cable?

 

[Kataklysm]

You need two extensions if you want both player 3 and 4

I play mostly with my son and occasionally my brother joins us, so 3 players max.

 

[Kujako]

Will we have to desolder the original dip switches and solder in the wires for the extension cable?

Should just have to set them all to off. The switches just connect a pin to ground, so if they're all open (off) then they can be connected to ground on the sub-panel.

 

[nonosto]

Got'em

where can I find it?

 

[Derick2k]

where can I find it?

Mouser has them, i put the part numbers in a earlier post

 

[nonosto]

thx so much.

 

[nonosto]

… found some extras!

I need some like this too.

 

[imbord3rlin3]

Looks like Mitsurugi is getting 250 from me sometime this week

 

[Mitsurugi-w]

250 RCA jacks? Thanks!

 

[imbord3rlin3]

250 RCA jacks? Thanks!

If I can find em I'll give em to ya. I ment 250 dollars in cps1 add on parts

 

[Mitsurugi-w]

Oh, ok. Which ones will you order?

 

[imbord3rlin3]

Oh, ok. Which ones will you order?

All of them and 2 of the 1st one. I was gonna patiently wait till u posted tho

 

[buffi]

Bottom installed dips --- $25
Dips with remote pcb and 3 ft cable --- $45
...
When they are done being manufactured I will have the Filter board mounted dip switches. They will be $45 as well.

Do you have pictures of prototypes of these or something cause like... I know I want one of these but don't really know which one.

 

[blonu]

If @Mitsurugi-w wants to offer them, he'll be the man.

@Mitsurugi-w Is this something you plan to offer?

 

[Mitsurugi-w]

Yes but a bit down the line when I can order the parts and pcbs

 

[jassin000]

Which ones will you order?

Cable extension (kicks+3p/4p to the filter board) (Qty2) $25
Spinner PCB (Qty1) $55
DIPs w/ Remote PCB - 3ft cable (Qty1) $45

Total $125

Could the cable for the remote dip pcb be less than 3ft?
I'm thinking like 1ft (or whatever the LCD selector screen is) would be perfect for me.

I really hope one of you 3D print design wizards modifies @twistedsymphony 's existing LCD selector case to support/add the remote DIP PCB.

 

[blonu]

Yes but a bit down the line when I can order the parts and pcbs

Thank you

 

[Mitsurugi-w]

Cable extension (kicks+3p/4p to the filter board) (Qty2) $25
Spinner PCB (Qty1) $55
DIPs w/ Remote PCB - 3ft cable (Qty1) $45

Total $125

Could the cable for the remote dip pcb be less than 3ft?
I'm thinking like 1ft (or whatever the LCD selector screen is) would be perfect for me.

I really hope some of you 3D print wizzards will modify @twistedsymphony 's existing LCD case to support/add the remote DIP PCB.

Yeah I can do it shorter but you might want to keep 3 ft "just in case"