What's new
By:
Filters

MITSU CPS1.X Multi Dual Crystal

One kit Please, and also paid

Thanks bt
 
Last edited:
For the crystal harness? Its just 22awg wire.
 
USPS can be stupid fast sometimes...I wasn't ready. lol. Get I'm opening up my system for this mod tonight or tomorrow. Thanks Mitsu!
IMG_1226.jpg
 
If the wire isn't hooked up at all to the wire on the multi - can I assume that it just fails to the 12mhz crystal?
 
mathewbeall said:
If the wire isn't hooked up at all to the wire on the multi - can I assume that it just fails to the 12mhz crystal?
Click to expand...
DO NOT leave the DASH pin floating/disconnected. The switching IC requires the connection to be made to function properly. If you want it to run at 12mhz, you have to ground the Dash pin if you are not hooking it up to the multi.
 
Last edited:
Well turns out I didn't have to wait! Install went super smooth and now my novice testing shall commence!
 

Attachments

  • 20240328_202621.jpg
    20240328_202621.jpg
    279.8 KB · Views: 64
  • 20240328_202625.jpg
    20240328_202625.jpg
    224 KB · Views: 62
  • 20240328_202629.jpg
    20240328_202629.jpg
    256.9 KB · Views: 52
  • 20240328_203211.jpg
    20240328_203211.jpg
    220.2 KB · Views: 52
  • 20240328_203223.jpg
    20240328_203223.jpg
    177.5 KB · Views: 52
  • 20240328_203331.jpg
    20240328_203331.jpg
    227.4 KB · Views: 64
Hi. What is that red PCB for?
 

Attachments

  • IMG_0217.jpeg
    IMG_0217.jpeg
    148.4 KB · Views: 15
Can we order some kits and have you ship them with the repro STV sound boards? (once ready)
 
mathewbeall said:
@raynex what game were you going to where you could see the difference?
Click to expand...
I noticed it in Knights of the Round. At 12mhz some places were too smooth; like 60fps fidelity, where 10mhz was fast, but not like that. Overall pacing feels better too at 10mhz.
 
Bjt said:
Hi. What is that red PCB for?
Click to expand...
CPS2DigitalAV HDMI mod. You need that adapter board to work on CPS1. That's the next step later this morning for me to finish up cause there's a new board that directs the Qsound audio through the HDMI mod. The red PCB wasn't designed to do that.
 
Every kit that was paid for by yesterday has been shipped. I have more parts fro another batch coming in a few days. CONTACT ME IN PM TO ORDER. Several who expressed interest here have not contacted me yet.
 
You must log in or register to reply here.
Back
Top