What's new

Escarioth

Grand Master
Joined
Feb 13, 2019
Messages
507
Reaction score
899
Location
Quebec
Hi :)

As some of you know, i decided to make Aluminum cases For our precious PCB.
I hate seeing them piled up, unprotected or in bags.

I'd prefer have them proudly displayed when i don't need them.
Sure, boxes would be fine but i'd like to go a step higher in making a nice product. (but yeah...my case will definitely cost more then a box)

If i can get around 5 users or more to want one, i'll be able to start a small production. More is always better :)
When i'm ready i'll contact each of you.

Shipping Fees
-----------------
Canada -------- 1x case 20usd +8usd for any extra cases
USA ------------ 1x case 28usd +8usd for any extra cases
International - 1x case 55 usd + ?15usd? for any extra cases (may have tracking it depend on country)
*about international shipping, i never shipped more then 1 case so its still experimental)*

-Inventory for sale -
1x - Astérix case proto (no stylish text on sides) BUt now has vinyl stickers on plate) - 105USD

Pre-Order NEW CASES --> closed.... until 2021-2022

-------------------------------------------------------------------------------------------------------------------------------------------------
PCBs i currently have that i MIGHT create a case

-Arkanoid

-Bubbles Bobbles (Bootleg with super BB version)
-Choplifter
-Cps2 (could do one but i don't feel it's needed unless i get a multi from darksoft)
-Cps3
-Gals Panic S
-Ghosts n' goblins (bootleg + original)
-Jrok williams
-Killer Instinct 2
-LadyBug
-Mr. Do
-Ms. Pac-man
-Mvs Unit 1-slot
-SegaSonic + trackball cases (sega system 32)
-------------------------------------------------------------------------------------------------------------------------------------------------
If you'd like another color, PM me and i'll see what i can do :)
but there might be some extras :(
-------------------------------------------------------------------------------------------------------------------------------------------------
Astérix - 110usd (shipping not included , sorry !)
Includes :

- 5x (6-32) Black Screws
- 6x (4-40) screws
- 8x (4-40) Black screws + nuts + locks (already installed)
- 12x (4-40) plastic washers (6x already installed)
- 1x back Plate (.081")
- 2x small side Plates (.081")
- 1x Vinyl sticker (check with me first)
- 1x case (blue)


Tetris - 95usd (shipping not included , sorry !)
Includes :

- 5x (6-32) Black Screws
- 4x (4-40) screws
- 8x (4-40) plastic washers (4x partly installed)
- 8x (4-40) black screws + nuts + locks (already installed)
- 1x Back Plate (.081")
- 2x small plates (.081")
- 1x Vinyl sticker (check with me first)
- 1x Tetris Case (Black)


Sexy Parodius - 135usd (shipping not included , sorry !)
This case ask me a LOT of work... so yeah i made it a bit pricy. Unless you want to talk it out, i'm open to ideas.
I'm currently out of pink, PM me for color choices.


Includes :

- 5x (6-32) Black Screws
- 4x (4-40) screws
- 3x (4-40) Standoff 5/8"
- 11x (4-40) plastic washers
- 10x black (4-40) + lock and nuts. (already installed)
- 1x Large plate for vinyl (already installed)i
- 1x Front Lexan (.125)
- 2x small plate for both sides (already installed)
- 2x vinyl stickers (check with me about them)
- 1x Sexy Parodius Case (sorry no more pink, check with me about colors i can do)


CPS1 - DASH - 120usd (shipping not included , sorry !)

For your information, i dont know if DS's upcoming cps1 multi kit will fit in this case. This case is for unmoded cps1 pcb
Includes :

- 5x (6-32) Black Screws
- 6x (4-40) screws
- 12x (4-40) plastic washers
- 8x (4-40) Black Screws
- 1x Medium Plate for front display
- 2x small side plates
- 1x front vinyl label (you can send your own or i can make it if it's not much work)
- 2x side vinyl label (you can send your own or i can make it if it's not much work)
- 1x CPS1 Case (black)

Double Dragon II - 135usd (shipping not included , sorry !)
Includes :

- 5x (6-32) Black Screws
- 4x (4-40) screws
- 8x (4-40) plastic washers (4x partly installed)
- 8x (4-40) black screws +nuts + lock (already installed)
- 1x back Plate (.081") (yellow)
- 1x Japan text plate (.081") + 3x (4-40) screws
- 1x Revenge text plate (.081") + 3x (4-40) screws
- 2x small plate (.081") for vinyl on the sides
- 2x side Vinyl stickers (check with me first)
- 1x Double Dragon II Case (Blue)

TMNT arcade game - 140usd (shipping not included , sorry !)
Includes :

- 7x (6-32) Black Screws
- 6x (4-40) screws
- 12x (4-40) plastic washers (4x partly installed)
- 8x (4-40) black screws +nuts + lock (already installed)
- 1x Front shell Plate (.081") (Green)
- 1x Logo Plate (.081") (black)
- 1x Dip Switch Plate (.081") (black)
- 2x small plate (.081") on both sides
- 5x Vinyl stickers (sides + logo + dipswitch + Konami)
- 1x TMNT Case (Black)

Special note - Konami vynil Won't be put on case, it is given for free and you can put it where you want)


-=NEW=- SEGA 16 (Multi or standard) - 125usd (shipping not included , sorry !)
Includes :

- 8x (4-40) screws
- 8x (4-40) plastic washers (4x partly installed)
- 4x (4-40) black screws +nuts + lock (already installed)
- 1x Front cover Plate (.081")
- 1x Dip Switch Plate (.081")
- 2x small plate (.081") on both sides
- 3x Vinyl stickers (sides + front)
- 1x Sega16 case

Special note - a remote case can be purchased to use with @Frank_fjs remote controller for 20Usd)
 

Attachments

  • astérix2.jpg
    astérix2.jpg
    92.1 KB · Views: 363
  • received_460095031522433.jpeg
    received_460095031522433.jpeg
    49.2 KB · Views: 440
  • sexyparo2.jpg
    sexyparo2.jpg
    276.3 KB · Views: 386
  • tetris1.jpg
    tetris1.jpg
    85.5 KB · Views: 379
  • tetris2.jpg
    tetris2.jpg
    89.1 KB · Views: 360
  • 72943768_1284114591770021_4582926453556903936_n.jpg
    72943768_1284114591770021_4582926453556903936_n.jpg
    359.9 KB · Views: 973
  • 76760108_2493488407433360_4782723663537373184_n.jpg
    76760108_2493488407433360_4782723663537373184_n.jpg
    51.2 KB · Views: 415
  • 78572753_464894160824056_2239493641460514816_n.jpg
    78572753_464894160824056_2239493641460514816_n.jpg
    49.5 KB · Views: 345
  • 86261335_10162860803185007_3313225608510570496_n.jpg
    86261335_10162860803185007_3313225608510570496_n.jpg
    62.6 KB · Views: 321
  • sega16.jpg
    sega16.jpg
    37.6 KB · Views: 98
Last edited:

undamned

Multi Baez
Champion
Multi Boyz
Joined
Jul 22, 2015
Messages
1,084
Reaction score
1,992
Location
AZ, USA
Pretty neat looking! I think it will be easier for me to envision with the PCB in place.
-ud
 

Escarioth

Grand Master
Joined
Feb 13, 2019
Messages
507
Reaction score
899
Location
Quebec
yeah , ill test it tonight with my own Astérix.
ill show more pictures later. i'm curious, if everything i did is fitting nicely.

only thing i wonder is if a PCB can be put on inserts or if it need some kind of small plastic protection.
like small plastic rings.

back at work we made lots of case for different companies but i never see them assembled.
if anyone can give me some help with that , that would be great
 

Escarioth

Grand Master
Joined
Feb 13, 2019
Messages
507
Reaction score
899
Location
Quebec
hmm... i dont think ill even reach 3 number on the price ;)
i'm keeping watch on how much time it took and it should'Nt be to pricy
 

Derick2k

Immortal
Joined
Nov 14, 2015
Messages
8,113
Reaction score
6,502
Location
NYC, USA
Ok, now I’m going to need one of these for my Asterix pcb, looks very nice :thumbup:
 

BuddyC

Professional
Joined
Sep 17, 2018
Messages
258
Reaction score
486
Location
Oslo, Norway
Please make one that fits Turtles in Time PCB :D
 
Last edited:

Escarioth

Grand Master
Joined
Feb 13, 2019
Messages
507
Reaction score
899
Location
Quebec
Oh my God. It looks beautiful.
I think i should produce this :P
Haha i had lots of fun at making it. Probably you ll have a better design. Mine is far from perfect, but i guess ill get better with each new one ill be making.


Please make one that fits Turtles in Time PCB :D
If i end up owning one, you can be sure ill give it a try ;)
 

BuddyC

Professional
Joined
Sep 17, 2018
Messages
258
Reaction score
486
Location
Oslo, Norway
Please make one that fits Turtles in Time PCB so I can buy :D
Love the craftsmanship! Big ups!
 

hursit

Champion
Joined
Mar 12, 2016
Messages
981
Reaction score
1,814
Location
Turkey
Oh my God. It looks beautiful.
I think i should produce this :P
Haha i had lots of fun at making it. Probably you ll have a better design. Mine is far from perfect, but i guess ill get better with each new one ill be making.
Your design is look really great. Keep working on it.
It looks like Aluminium right ?
 

Escarioth

Grand Master
Joined
Feb 13, 2019
Messages
507
Reaction score
899
Location
Quebec
Your design is look really great. Keep working on it.It looks like Aluminium right ?
Yes ^^ 1/8"

maybe i should have gone a bit more thin
but its not that heavy. i might have to consider this if i decide to make some for others.

but projects like that are veeeery fun to do :D
 
Top